Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This ring is made using the designated size 6 configuration on the Ring Weaver Tool. The size is approximate and will be influenced by the size of your weaving material. To modify the size of your ring, adjust the length of wire and peg placement on your tool accordingly.
- Please watch the video: How to Use the Ring Weaver Tool by Beadalon. Follow along with the video to assemble your Ring Weaver Tool, placing your pegs in the holes designated for a size 6 ring.
- Use flush cutters to cut 40 inches of 24 gauge gold craft wire and load it onto the Ring Weaver Tool as shown in the video.
- Follow along with the video to create a 5 layer ring.
- Please watch the video: How to Add beads to a Wire Woven Ring. Follow along with the video to add beads to the edges of your ring. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
- BCT-777 - Czech Glass Minos par Puca, Cylindrical Beads 2.5x3mm, 120 Pieces, Jet Black
Project uses 14 pieces. You will need 1 package.
- WCR-2430 - Artistic Wire, Silver Plated Craft Wire 24 Gauge Thick, 10 Yard Spool, Tarnish Resistant Silver
Project uses 40 inches. You will need 1 package.
- WCR-2630 - Artistic Wire, Silver Plated Craft Wire 26 Gauge Thick, 15 Yard Spool, Tarnish Resistant Silver
Project uses 10 feet. You will need 1 package.
RECOMMENDED TOOLS:- XTL-3308 - Beadalon Ring Weaver Tool, Aluminum Base with 18 Pins, Makes Sizes 4 / 6 / 9 & 11
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose