Retired - Morocco Morning Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To see an example of a similar project, please watch our video: How to Make a Pair of Resin Earrings featuring Nunn Design Earring Bezels. In this video you will learn how to mix and colorize your resin to make a pair of earrings.
2. From what you learned in the video, mix your resin and separate the amount you want to color into a cup; about 2 tsp. Slowly add a drop of white and mix, then add a drop of transparent blue. If you want a lighter color, you can add a little bit more of the white. Add a small bit of mica power at a time until you have achieved the desired effect.
3. Once you have achieved your desired color use a popsicle stick add the resin to the bezels. Allow to cure about 24 hours. Using a lighter to get rid of any air bubbles about 30 minutes after you pour.
4. Finally, open one jump ring and attach it to the earring post and to the finished pendant.

• PND-426 - Bezel Pendant, Marrakesh Drop 22x28mm, Antiqued Silver, 1 Piece, by Nunn Design
  Project uses 2 pieces. You will need 2 packages.


• FEA-128 - Earring Post, Flat Tag Mini Navette 5x18mm, Bright Silver, 1 Pair, by Nunn Design
  Project uses 1 Pair. You will need 1 package.


• FJR-2071 - Nunn Design Silver Plated Open Jump Rings Etched 6.5mm 17 Gauge (10)
  Project uses 2 pieces. You will need 1 package.


• TRC-51 - Easy Cast Clear Casting Epoxy Enamel Resin 8 oz
  Project uses 1 piece. You will need 1 package.


• TRC-87 - CASTIN CRAFT Casting Epoxy Resin Opaque White Pigment Dye 1 Oz
  Project uses 1 piece. You will need 1 package.


• TRC-92 - CASTIN CRAFT Casting Epoxy Resin Transparent Blue Pigment Dye 1 Oz
  Project uses 1 piece. You will need 1 package.


• XTL-1162 - Crystal Clay Sparkle Dust - Mica Powder - Metallic Blue (1.5 Grams)
  Project uses 1 piece. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• TRC-604 - ICE Resin, Mixing Cups & White Stir Sticks, 20 Pack