Retired - Mint Parfait Earrings

Name: Retired - Mint Parfait Earrings
Brand: Beadaholique
SKU: E2266
Availability: InStock

PROJECT E2266

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Austrian crystals are framed by TierraCast bezels in this simple tear drop earring design. It's easy to assemble, the only hard part is deciding which is your favorite color combo of crystals.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below you will make one earring. Repeat all instructions to make the second earring. You will also need a scrap of wire or a toothpick for this project.

Begin by adding a dab of E6000 to the well of the bezel pendant, place the rose teardrop stone into the bezel. Add a dab of E6000 to the well of the bezel link, place the mint rivoli into the bezel. Set these aside to dry.
Open one jump ring and attach it to the top loop of the pendant and the bottom loop of the link. Close the jump ring.
Open the loop of the lever earring hook. The small loop will open like a jump ring. Attach the top loop of the bezel link. Close the loop.

We recommend waiting at least 24 hours before wearing to allow the glue to fully set.

WHAT YOU'LL NEED: (scroll down for purchase options)

SWCR-4155 - Austrian Crystal, 4320 Pear Fancy Stone 14x10mm, 1 Piece, Rose F
Project uses 2 pieces. You will need 2 packages.

SWCR-4345 - Austrian Crystal, 1122 Rivoli Fancy Stones 12mm, 4 Pieces, Crystal Mint Green
Project uses 2 pieces. You will need 1 package.

PNT-131 - TierraCast Bezel Pendant, Fits 4320 Pear 14x10mm, 1 Piece, Silver Tone
Project uses 2 pieces. You will need 2 packages.

FCO-3084 - TierraCast Rhodium Plated Connector Link Beaded Edge Setting For Austrian crystal 12mm Rivoli (2)
Project uses 2 pieces. You will need 1 package.

FEA-6005 - Earring Findings, Leverback 13x11mm, 50 Pieces, Silver Plated
Project uses 2 pieces. You will need 1 package.

FJR-3906 - Silver Plated Open Jump Rings Oval 4x6mm 20 Gauge (50)
Project uses 2 pieces. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Theme	Spring
Ingredients	PNT-131, FCO-3084, FEA-6005, FJR-3906, XTL-1054,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 2 package(s).
1 package = .

             / Package | SKU: PNT-131

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FCO-3084

Earring Findings, Leverback 13x11mm, Silver Plated (25 Pairs)

            Earring Findings, Leverback 13x11mm, Silver Plated (25 Pairs)
        
You will need 1 package(s).
1 package = 25 Pairs.

                $13.79
            
             / Package | SKU: FEA-6005

Silver Plated Open Jump Rings Oval 4x6mm 20 Gauge (50 pcs)

            Silver Plated Open Jump Rings Oval 4x6mm 20 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.47
            
             / Package | SKU: FJR-3906

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054