Retired - May Birthstone Necklace featuring Austrian Crystal

Retired - May Birthstone Necklace featuring Austrian Crystal

Name: Retired - May Birthstone Necklace featuring Austrian Crystal
Brand: Beadaholique
SKU: N2240
Availability: InStock

PROJECT N2240

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Celebrate a May birthday with an Austrian crystal Fancy Stone in their beautifully rich, sparkling Emerald.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 16 inches. To modify the length, please choose a finished chain in your desired length. You will also need a scrap of wire or a toothpick for this project.

Begin by using a toothpick or scrap of wire to add a dab of E6000 to the well of the setting. Place the stone into the setting.
Open one jump ring and attach it to the setting and around the chain. Close the jump ring.
Please allow the glue to set for at least 24 hours before wearing.

WHAT YOU'LL NEED: (scroll down for purchase options)

SWCR-4561 - Austrian Crystal, 4470 Cushion Fancy Stone 10mm, 1 Piece, Emerald Foiled
Project uses 1 piece. You will need 1 package.

SWCR-1226 - Austrian Crystal Fancy Stone Setting, 4470 Cushion 10mm, 1 Piece, Rhodium Plated
Project uses 1 piece. You will need 1 package.

AXC-98926 - Silver Plated Fine Cable Chain Necklace with Lobster Clasp - 2x1.8mm Links 16 Inches Long
Project uses 1 piece. You will need 1 package.

FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Ingredients

SWCR-4561, SWCR-1226, AXC-98926, FJR-5150, XTL-1054,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring
Standard Necklace and Bracelet Lengths

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Finished Cable Chain Necklace, Oval Links with Lobster Clasp 2x1.8mm, 16 Inches, Silver Plated

            Finished Cable Chain Necklace, Oval Links with Lobster Clasp 2x1.8mm, 16 Inches, Silver Plated
        
You will need 1 package(s).
1 package = 1 Piece.

                $3.80
            
             / Package | SKU: AXC-98926

Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)

            Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $5.39
            
             / Package | SKU: FJR-5150

Sold out

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.09
            
             / Package | SKU: XTL-1054