Retired - Marissa Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Use a pair of chain nose pliers to bend the top scallop on an antique silver plated oval bezel cup out until it sits flat, angling straight up.
2. Place a dab of E6000 glue on the back of a light amethyst striped glass cabochon and press it into place in the bezel cup. Allow the glue to dry thoroughly before continuing.
3. Place a Czech glass light pink and blue bead onto a silver plated 2", 21 gauge eye pin and create a simple wire loop after the bead. Use pliers to bend the top and bottom loops perpendicular to each other.
4. Open one of the loops on the bead and hang the bezel cup by the bent scallop. Close the loop.
5. Open the loop on an antique silver plated bali style teardrop earring hook and hang the bead by the free loop. Close the loop.

• SPCB-327 - Clear W/ Lt Amethyst Stripes Glass Cabochons 18x13mm Oval (1)
  Project uses 2 pieces. You will need 2 packages.


• PND-6759 - Nunn Design Antiqued Silver Plated Oval Bezel Cup Pendant Lace Edge 18x13mm x2
  Project uses 2 pieces. You will need 1 package.


• BCP-78215 - Czech Glass Druk Round Beads 8mm 2-Tone Light Pink/Blue (25)
  Project uses 2 pieces. You will need 1 package.


• FHP-6261 - Silver Plated Open Eye Pins 21 Gauge 2 Inch (x50)
  Project uses 2 pieces. You will need 1 package.


• FEA-8572 - Antiqued Silver Plated Earring Hooks Ear Wires With Bali Style Teardrop Detail (5 Pairs)
  Project uses 2 pieces. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 tube. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose