Retired - Margot in Montana Blue

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Start by cutting off 6" of chain.
2. Open and attach three jump rings to the three holes at the bottom of the pendant. Leave the jump rings open.
3. On one of the outside rings place the last chain link on one side of the chain. Scoop the chain approx 4" to bring to the other outside jump ring and place a chain link onto this jump ring. Then scoop back to the first jump ring with the remaining amount of chain to create a tiered effect.
4. Slide a bicone crystal pendant onto one of the outer jump rings, placing it in front of the chain. Close the jump ring. Repeat this step on the other outer jump ring.
5. Slide the crystal pear pendant onto the middle jump ring. Close that jump ring.
6. Open the loop at the base of the earring finding, the same way you would a jump ring, and attach it to the top of the Vintaj pendant. Close the loop to secure.

• PND-7394 - Vintaj Natural Brass Chandalier Bohemian Drop Pendant 20.5 x 29.5mm (2)
  Project uses 2 pieces. You will need 1 package.


• SWC-3400 - Austrian Crystal, 6301 Bicone Beads 8mm, 8 Pieces, Crystal
  Project uses 4 pieces. You will need 1 package.


• SWC-4016 - Austrian Crystal, 6106 Pear Pendant 16mm, 2 Pieces, Crystal / Montana Blend
  Project uses 2 pieces. You will need 1 package.


• FJR-5175 - Antiqued Brass Open Jump Rings 7mm 19 Gauge (20)
  Project uses 6 pieces. You will need 1 package.


• CHA-10071 - Vintaj Natural Brass 4x3mm Small Cable Chain - Sold By The Foot
  Project uses 1 foot. You will need 1 package.


• FEA-6620 - Vintaj Natural Brass Classic French Ear Wire 20mm (2 Pair)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex