Malaysian Adventure Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by stringing one drop bead on to one head pin. Make a simple wire loop. Repeat this step twice more.
2. Then open the simple wire loop, same as you would a jump ring and attach it to one hole of the crescent. Close the loop. Attach all three to the bottom holes (see photo).
3. Finally, open the loop of the earring hook, same as you would a jump ring, and attach it to the top hole. Close the loop and you are all done.

• PNT-365 - Metal Pendant Link, Crescent Moon Drop with 4 Holes, 19.5x30mm, 2 Pieces, Brass
  Project uses 2 pieces. You will need 1 package.


• FEA-511 - Earring Findings, V-Shaped French Ear Wire with Loop 15.5x26mm, 2 Pairs, Gold Tone
  Project uses 2 pieces. You will need 1 package.


• BCP-2875 - Czech Glass Beads, Faceted Bottom Cut Drop 8mm, Lime Green Silk, Bronze, 1 Str, by Raven's Journey
  Project uses 6 pieces. You will need 1 package.


• FHP-3028 - Head Pins, with Ball Head 2 Inches Long and 22 Gauge Thick, 20 Pieces, 22K Gold Plated
  Project uses 6 pieces. You will need 1 package.

• XTL-0021 - Baby Wubbers Quality Fine Round Nose Jeweller's Pliers
• XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
• XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)