Retired - Lilac Harmony Memory Wire Bracelet

Retired - Lilac Harmony Memory Wire Bracelet

Name: Retired - Lilac Harmony Memory Wire Bracelet
Brand: Beadaholique
SKU: B816
Availability: OutOfStock

PROJECT B816

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This bracelet has a boutique-inspired look with its pops of gold and lilac. Wood beads, aged seed beads, and Tierracast spacer beads spiral around memory wire in this easy to make bracelet design. The finishing touch is a Nunn Design bezel and Austrian crystal chaton in lilac.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Note: You must use memory wire cutters to cut memory wire. Do not attempt to use normal jewelry making cutters.

Begin this bracelet by cutting your memory wire so it is a little more then one and a half loops around. Create a simple wire loop on one end. This loop will stop your beads from falling off once you string them on the wire.
String on the memory wire: 1 3mm spacer bead, 3 seed beads, 1 6mm nugget spacer bead, 3 wood beads, 1 6mm nugget spacer bead, 3 seed beads, 1 3mm spacer bead, and 1 wood bead.
Repeat the previous sequence 5 more times. Dependent upon how long your memory wire is you might need to leave off a few beads during the last sequence or even add a bead or two to complete the bracelet. You will want to make sure that you leave approximately 1/4 inch at the end of exposed wire so that you can create another loop in the next step.
Create a simple wire loop on the end of your bracelet using your round nose pliers.
Open a jump ring and and connect the bezel to one of the simple wire loops on your bracelet.
Place a small dab of E6000 glue into your bezel setting and then set your crystal down into it. Let dry.
Enjoy!

Design Tip: Let your glue dry for a full 24 hours before wearing.

WHAT YOU'LL NEED: (scroll down for purchase options)

BWD-1029 - EuroWood Natural Wood Beads, Round 8mm Diameter, 100 Pieces, White
Project uses 19 pieces. You will need 1 package.

FJR-2069 - Nunn Design Antiqued 24kt Gold Plated Open Jump Rings Etched 6.5mm 17 Gauge (10)
Project uses 1 piece. You will need 1 package.

PND-904 - Nunn Design Open Back Bezel Charm, Circle Fits SS39 Xirius Stone, 1 Piece, Antiqued Gold
Project uses 1 piece. You will need 1 package.

SWCH-639584 - Austrian Crystal, 1088 Xirius Round Stone Chatons ss39, 6 Pieces, Crystal Lilac
Project uses 1 piece. You will need 1 package.

BMB-3145 - TierraCast Antiqued 22K Gold Plated Pewter Beaded Spacer Beads 3x3mm (50)
Project uses 10 pieces. You will need 1 package.

BCS-9030 - Czech Glass, Bohemian Aged 5/0 Round Seed Beads, 10 Grams, Etched Violet and Amber
Project uses 30 pieces. You will need 1 package.

WXM-030 - Bright Gold Color Bracelet Memory Wire 12 Loops
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

BMB-3609 - TierraCast 22K Gold Plated Pewter Nugget Heishe Spacer Beads 6mm (10)
Project uses 10 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5610 - Xuron Memory Wire Cutters Cutting Pliers -Strong & Easy
XTL-0021 - Baby Wubbers Quality Fine Round Nose Jeweller's Pliers
XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers

Additional Information

Theme	Spring
Ingredients	BWD-1029, FJR-2069, PND-904, BMB-3145, WXM-030, XTL-1054, BMB-3609,

Useful Techniques & Learning Guides

How to Create a Simple Wire Loop
How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

EuroWood Natural Wood Beads, Round 8mm Diameter, White (100 Pieces)

            EuroWood Natural Wood Beads, Round 8mm Diameter, White (100 Pieces)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $5.49
            
             / Package | SKU: BWD-1029

Nunn Design Antiqued 24kt Gold Plated Open Jump Rings Etched 6.5mm 17 Gauge (10 pcs)

            Nunn Design Antiqued 24kt Gold Plated Open Jump Rings Etched 6.5mm 17 Gauge (10 pcs)
        
You will need 1 package(s).
1 package = 10 Pieces.

                $2.99
            
             / Package | SKU: FJR-2069

Sold out

            
You will need 1 package(s).
1 package = .

             / Package | SKU: PND-904

            
You will need 1 package(s).
1 package = .

             / Package | SKU: BMB-3145

Memory Wire, Bracelet Round Size Medium 2.25 Diameter, 12 Loops, Gold Plated

            Memory Wire, Bracelet Round Size Medium 2.25 Diameter, 12 Loops, Gold Plated
        
You will need 1 package(s).
1 package = 1 Pack.

                $2.39
            
             / Package | SKU: WXM-030

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054

TierraCast 22K Gold Plated Pewter Nugget Heishe Spacer Beads 6mm (10 Pieces)

            TierraCast 22K Gold Plated Pewter Nugget Heishe Spacer Beads 6mm (10 Pieces)
        
You will need 1 package(s).
1 package = 10 Pieces.

                $4.54
            
             / Package | SKU: BMB-3609