Retired - Lemon Meringue Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut a 1 inch piece of silver chain.
2. Open a jump ring and slide it through the hole of one 8mm Austrian crystal crystal round pendant. Also slide on the last link of the piece of chain. Close the jump ring.
3. Open another jump ring and slide it through the hole of one 6mm Austrian crystal crystal round pendant. Skip one link of chain and slide it through the next link up. Close the jump ring.
4. Repeat step 3 five more times, so you have six 6mm round pendants attached along the length of chain.
5. Open the loop of an earring hook the same way you would open a jump ring. Slide it through the first link of chain. Close the loop.
6. Enjoy your earrings!

• SWCR-1085 - Austrian Crystal, 6428 Xilion Round Pendants 8mm, 8 Pieces, Yellow Opal
  Project uses 2 pieces. You will need 1 package.


• SWCR-1084 - Austrian Crystal, 6428 Xilion Round Pendants 6mm, 12 Pieces, Yellow Opal
  Project uses 12 pieces. You will need 1 package.


• CHA-9970 - Bright Silver Plated Round Rolo Chain 3mm Bulk By The Foot
  Project uses 2 inches. You will need 1 package.


• FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
  Project uses 14 pieces. You will need 1 package.


• FEA-6005 - Silver Plated Leverback Earrings -50 Earring Findings
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex