Leather and Noodle Bead Choker

Name: Leather and Noodle Bead Choker
Brand: Beadaholique
SKU: N2145
Availability: InStock

PROJECT N2145

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This necklace combines leather and metals in a sleek design using natural leather cord and metal noodle beads.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This choker measures 16.5 inches. To modify the length, simply modify the size of leather cord respectively. You will also need a toothpick or scrap of wire for this project.

Begin by cutting four cords of leather 16 inches each.
Using a toothpick or scrap of wire place a dab of E6000 into the well of one cord end. Gather all four cord ends and place them into the well. Allow to dry about 20 minutes before moving on.
To each cord slide on one noodle bead.
Next place a dab of E6000 into the well of the other cord end. Gather all four cord ends and place them into the well. Allow to dry about 20 minutes before moving on.
Open one jump ring and attach it to one cord end and to one loop of the magnetic clasp. Close the jump ring. Repeat on the other side and you're all done. I recommend allowing the necklace to fully dry at least 24 before wearing to allow it to set.

WHAT YOU'LL NEED: (scroll down for purchase options)

CHY-1501 - Genuine Leather Cord, Round 1.5mm, By the Yard, Natural
Project uses 64 Inches. You will need 2 packages.

BMB-4076 - Silver Plated Long Curved Noodle Tube Beads 3mm x 100mm (4)
Project uses 4 pieces. You will need 1 package.

FCR-1604 - Beadsmith Silver Plated Barrel Cord Ends With Ring 10mm Long - Fits Up To 4mm Cords (4)
Project uses 2 pieces. You will need 1 package.

FCL-6808 - Silver Plated Magnetic Clasps 6 x 4.5mm (4 Sets)
Project uses 1 piece. You will need 1 package.

FJR-3920 - Silver Plated Open Jump Rings Oval 21 Gauge 3x4mm (50)
Project uses 2 pieces. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Theme	Yoga, Summer, Boho
Ingredients	CHY-1501, BMB-4076, FCR-1604, FCL-6808, FJR-3920, XTL-1054,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.

Leather Cord, Round 1.5mm, Natural, by Leather Cord USA (1 yard)

            Leather Cord, Round 1.5mm, Natural, by Leather Cord USA (1 yard)
        
You will need 2 package(s).
1 package = 1 Yard.

                $2.25
            
             / Package | SKU: CHY-1501

Sold out

Silver Plated Long Curved Noodle Tube Beads 3mm x 100mm (4 pcs)

            Silver Plated Long Curved Noodle Tube Beads 3mm x 100mm (4 pcs)
        
You will need 1 package(s).
1 package = 4 Pieces.

                $3.19
            
             / Package | SKU: BMB-4076

Sold out

The Beadsmith Cord Ends, Barrel with Ring 10mm, Fits up to 4mm Cord, Silver Plated (4 Pieces)

            The Beadsmith Cord Ends, Barrel with Ring 10mm, Fits up to 4mm Cord, Silver Plated (4 Pieces)
        
You will need 1 package(s).
1 package = 4 Pieces.

                $2.49
            
             / Package | SKU: FCR-1604

Sold out

Magnetic Clasps, Round 6x4.5mm, Silver Plated (1 Set)

            Magnetic Clasps, Round 6x4.5mm, Silver Plated (1 Set)
        
You will need 1 package(s).
1 package = 1 Set.

                $0.99
            
             / Package | SKU: FCL-6808

Sold out

Silver Plated Open Jump Rings Oval 21 Gauge 3x4mm (50 pcs)

            Silver Plated Open Jump Rings Oval 21 Gauge 3x4mm (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $2.49
            
             / Package | SKU: FJR-3920

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054