Retired - Lavender Fields Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by using a toothpick to place a dab of glue into the well of the fancy stone setting. Place the stone into the setting. Set aside and allow to dry.
2. String one bead onto one eye pin. Make a simple wire loop. Repeat 9 more times.
3. Open one loop of the eye pin with the bead on it, same as you would a jump ring, and attach it to a second eye pin with a bead on it creating a chain. Continue this process to make a chain of five beads. Then repeat to make a second chain of 5 links.
4. Cut the silver cable chain into two lengths of 6 inches each. Open the loop of one end of the beaded chain and attach it to one end link of the silver chain. To the other end of the beaded chain, use one jump ring to attach this end to the loop of the fern finding. Repeat this on the other side of the fern.
5. To the end of the silver chain, attach one jump ring and one lobster clasp. Close the jump ring.
6. To the other end of the other silver chain attach one jump ring. Close the jump ring.
7. Finally, open one more jump ring and attach it to the fancy stone pendant setting and to the center V of the fern finding. Close the jump ring.

• FCO-3470 - Nunn Design Bright Silver Plated Pewter Fern Connector Bar 33mm (1)
  Project uses 1 piece. You will need 1 package.


• SWCR-4475 - Austrian Crystal Fancy Stone Pendant Setting, Fits 4470 Cushion 12mm, 1 Piece, Rhodium Plated
  Project uses 1 piece. You will need 1 package.


• SWCR-4547 - Austrian Crystal, 4470 Cushion Fancy Stone 12mm, 1 Piece, Crystal Lavender DeLite
  Project uses 1 piece. You will need 1 package.


• SWC-06623 - Austrian Crystal, 5000 Round Beads 6mm, 10 Pieces, Peridot Shimmer
  Project uses 10 pieces. You will need 1 package.


• CHA-9812 - Nunn Design Silver Plated Oval Cable Chain 2.3mm - By The Ft
  Project uses 1 Foot. You will need 1 package.


• FHP-6259 - Silver Plated Open Eye Pins 21 Gauge 1 Inch (x50)
  Project uses 10 pieces. You will need 1 package.


• FJR-5219 - Silver Plated Open Jump Rings 6mm 20 Gauge (50)
  Project uses 5 pieces. You will need 1 package.


• FCL-2507 - Silver Plated Curved Lobster Clasps 10mm (10)
  Project uses 1 piece. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers