Retired - Katiedids Earrings in Margarita

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Take the head pin and thread it through the hole at the bottom of the Katiedids canal.
2. Thread on the beads: orange, green, white, yellow; then yellow, white, green, orange.
3. Then thread the headpin through the other side of the Katiedids. Create a simple wire loop.
4. Attach the earring finding to your simple wire loop.

• FCO-9954 - Katiedids Silver Plated Scalloped Components - Rectangle With 2 Holes 35mm (5)
  Project uses 2 pieces. You will need 1 package.


• DSQ-4062 - Miyuki 4mm Glass Cube Beads Opaque Bright Orange AB 10 Grams
  Project uses 4 pieces. You will need 1 package.


• DSQ-420 - Miyuki 4mm Glass Cube Beads Opaque White Luster 420 10 Grams
  Project uses 4 pieces. You will need 1 package.


• DSQ-4042 - Miyuki 4mm Glass Cube Beads Opaque Yellow AB 404R 10 Grams
  Project uses 4 pieces. You will need 1 package.


• FHP-5320 - Silver Plated Head Pins 2 Inches Long/22 Gauge (X50)
  Project uses 2 pieces. You will need 1 package.


• FEA-2010 - Sterling Silver French Wire Earring Hooks (10)
  Project uses 2 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose