Retired - Katia Earrings

Name: Retired - Katia Earrings
Brand: Beadaholique
SKU: E3017
Availability: OutOfStock

PROJECT E3017

Designer: Karlin Jones

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

These vibrant earrings incorporate dark neon purple beads hanging off of ornate filigree chandelier earrings. They will add a gorgeous pop of color to your outfit!

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Begin by stringing on a dark neon purple Czech glass bead onto your head pin and create a simple wire loop with your round nose pliers. Snip off any excess wire with your flush cutters.
Repeat this process 2 more times.
Open up 3 jump rings and slide them each onto the 3 simple wire loops you just made. Do not close your jump rings quite yet.
Next, take your chandelier earring component and through the holes on the bottom, slide on each of your open jump rings. Close the jump rings using your chain nose pliers.
Then open the bottom loop of your earring hook (how you would a jump ring) and slide on your chandelier earring component.
Your earring is now ready.

WHAT YOU'LL NEED: (scroll down for purchase options)

BCP-13024 - Czech Glass Smooth Round Beads 8mm Diameter - Dark Neon Vivacious Purple (1 ST)
Project uses 6 pieces. You will need 1 package.

FHP-5214 - 22K Gold Plated Head Pins - 22 Gauge/1 Inch (50)
Project uses 6 pieces. You will need 1 package.

FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 6 pieces. You will need 1 package.

FEA-3312 - Gold Plated Small Earring Hooks 16mm (20 Pairs)
Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Additional Information

Ingredients

FHP-5214, FJR-5452,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FHP-5214

22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)

            22K Gold Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.07
            
             / Package | SKU: FJR-5452