Retired - Jungle Lady Bracelet

PROJECT B2013
Designer: Kat Silvia
Skill Level: Beginner
Show your stripes with this zebra wooden beaded bracelet.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This finished bracelet measures about 9" when pulled out and measured, however please be aware that the inner diameter of the bracelet is about 7 1/2". To adjust the size, adjust the number of beads you use.
  1. To make this bracelet, you will be using the same technique as pearl knotting, just on a larger scale.
  2. Cut about 2 feet of micro-fiber suede cord.
  3. Take your fold over crimping pliers and at the end of one side of the cord, attach a fold over cord end.
  4. Now you can begin your knotting. Tie one over hand knot as close as you can to the cord end.
  5. Thread on one wood bead, tie another knot. Repeat this step 8 more times.
  6. Snip the micro suede and attach another fold over cord end, as you did before.
  7. Open one jump ring, loop it through the hole of the cord end. Close the jump ring.
  8. Open another jump ring and loop it through the other cord end and the loop on the lobster clasp. Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BWD-0301 - Round Wood Beads Dark Brown And Black Zebra Stripe 18mm (4)
    Project uses 9 pieces. You will need 3 packages.

  • FJR-5000 - Antiqued Brass Open Jump Rings 5mm 19 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • FCL-4711 - Antiqued Brass Curved Lobster Clasps 12mm (10)
    Project uses 1 piece. You will need 1 package.

  • FCR-1445 - Antiqued Brass Foldover 3mm Cord Ends For Ribbon
    Project uses 2 pieces. You will need 1 package.

  • XCR-43102 - Beadsmith Medium Brown Faux Leather Suede Beading Cord 9Ft (3 Yd) Spool
    Project uses 24 inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5260 - Beadsmith Fold Over Crimping Pliers For Leather & Suede Findings
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients FCR-1445, XCR-43102,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Cord Ends, Foldover For 3mm Leather Cord, Antiqued Brass (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$7.39 / Package | SKU: FCR-1445
You will need 1 package(s).
1 package = .
/ Package | SKU: XCR-43102
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed