Retired - Jordan Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Using your flush cutters, cut 2 lengths of 10" long chain.
2. Next, using your chain nose pliers, open up a jump ring and slide it onto the last link from one end of both lengths of chain. Close this jump ring.
3. Open a second jump ring and slide it onto the jump ring you just attached as well as the loop from your Vintaj stamping. Close the jump ring.
4. Open up another jump ring and slide on the end chain link on one side of your necklace. Close the jump ring.
5. Open up yet another jump ring and slide on the last link from the chain on the other side of your necklace. Also slide on the loop from your lobster clasp and close your jump ring.
6. The chain on your necklace should be finished. Now we will begin on the focal pendant.
7. Please watch the video on How To Use a Relief Block..
8. Using what you learned in the video, sand down your Vintaj pendant using the side of your relief block to bring out the details in the design.
9. Next, watch the video on . How To Use a Magical Pick
10. Following what you learned in the video, place 10 tiny dabs of Hypo Cement onto the center circle portion of your pendant (starting around the edges first) and also one dab each onto the top and bottom indented portions of your Vintaj pendant. Look at the photo for placement details.
11. Next, using what you learned in the Magic Pick video, begin placing your Hematite flatbacks one by one onto your dabs of glue, making sure to place them flat side down. Set your pendant aside to dry for a few minutes.
12. You necklace is done.

• CHA-9965 - Antiqued Brass Round Rolo Chain 3mm Bulk By The Foot
  Project uses 20 inches. You will need 2 packages.


• PND-7578 - Vintaj Natural Brass Global Spear Stamping Pendant 54x15.5mm (1)
  Project uses 1 piece. You will need 1 package.


• FJR-5300 - Antiqued Brass Open Jump Rings 5mm 18 Gauge (x100)
  Project uses 4 pieces. You will need 1 package.


• FCL-4710 - Antiqued Brass Curved Lobster Clasps 9.5mm (10)
  Project uses 1 piece. You will need 1 package.


• SWF-40915 - Austrian Crystal, Round Flatback Rhinestone SS9 2.5mm, 72 Pieces, Hematite
  Project uses 12 pieces. You will need 1 package.


• XTL-1001 - G S Hypo Cement Precise Applicator Essential!
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-4004 - Beadsmith Magical Rhinestone Pick Up Tool With Cleaning Kit - Great For Placing Flatback Rhinestones
• XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding