Retired - January Elegance Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut off 1.5 inches of chain by cutting off the jump rings that attach them. You will need a portion of the chain that begins and ends with a larger round link. You're length of chain should be 3 large links and 2 small links. Be sure to cut off the jump rings attached at either end.
2. Open one jump ring and attach the Rivoli pendant and the last link in the chain. Close the jump ring.
3. Open the loop of the earring hook, same way you would a jump ring and attach the other end of the chain to this loop. Close the loop.
4. All done!

• PND-09150 - TierraCast Pewter Charm, Rivoli Frame with Austrian Crystal 17.5x14mm, 1 Piece, Silver Plated/Siam
  Project uses 2 pieces. You will need 2 packages.


• CHA-0417 - Silver Plated Bulk Chain, 7 & 3mm Moroccan Links, Sold By The Foot
  Project uses 3 Inches. You will need 1 package.


• FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
  Project uses 2 pieces. You will need 1 package.


• FEA-3005 - Silver Plated Surgical Steel Earring Hooks Hypo-Allergenic (x100)
  Project uses 2 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers