Retired - Ice Fishing Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut off a piece of chain 1.5". Open one 8mm jump ring and attach the fish pendant and one end of the 1.5" chain. Close the jump ring.
2. Cut off a piece of chain that is 2.5". Open one 8mm jump ring and attach the center link of this chain to the jump ring as well as the rectangular sea glass pendant and the other end of the chain with the fish pendant on it. Close the jump ring. Note: The sea glass has a concave shape to it. Be sure that the chain with the fish on it, hangs on the front of the curve, facing outward.
3. Onto one eye pin place one mini oval bead. Make a simple wire loop. Repeat this one more time with a second mini oval bead.
4. On to the piece of chain attached to the sea glass, open one of the eye pins with the mini oval bead on it the same way you would a jump ring and attach it to one end of this chain. Repeat on the other side of this chain.
5. To each eye pin attach 6" of chain.
6. To one end of the 6" chain, open a 5mm jump ring, attach it to the chain and attach one lobster clasp to the jump ring. Close the jump ring.
7. To the other end of the 6" chain, open a 5mm jump ring, attach it to the chain and close the jump ring.

• BGL-10038 - Cultured Sea Glass, Curved Rectangle Pendants 35x13.5mm, 2 Pieces, Cobalt Blue
  Project uses 1 piece. You will need 1 package.


• SWC-7505 -
  Project uses 1 piece. You will need 1 package.


• SWBB-7401 - Austrian Crystal, 5051 Oval Mini Beads 8mm, 4 Pieces, Aquamarine
  Project uses 2 pieces. You will need 1 package.


• FHP-6265 - Silver Plated Open Eye Pins 22 Gauge 1 Inch (x50)
  Project uses 2 pieces. You will need 1 package.


• FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 2 pieces. You will need 1 package.


• FJR-5180 - Silver Plated Open Jump Rings 8mm - 18 Gauge (100)
  Project uses 2 pieces. You will need 1 package.


• CHA-98807 - Silver Plated Krinkle Chain 3mm Bulk By The Foot
  Project uses 17.5 inches. You will need 2 packages.


• FCL-2507 - Silver Plated Curved Lobster Clasps 8mm (10)
  Project uses 1 piece. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex