Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Using your chain nose pliers, open the loop at the bottom of your gold plated earring hook (how you would a jump ring) and slide on the loop that is at the top of your gold plated chandelier earring finding and close.
  2. Next, onto a gold plated ball head pin, slide on 1 simulated ruby glass bead and create a wrapped wire loop using your round nose pliers. Snip off any excess wire using your flush cutters.
  3. Repeat this step 5 more times.
  4. Then, using your chain nose pliers, open a 3mm gold plated jump ring and slide it through the wrapped wire loop from one of your bead dangles. Also slide the jump ring through a loop in the filigree on the left side of your earring finding. Refer to the photo for exact placement.
  5. Repeat adding bead dangles onto your earring finding via open jump rings and close.
  6. That's it!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FEA-8403 - 22K Gold Plated 25mm Hoops For Chandelier Earrings 5 Pair
    Project uses 2 pieces. You will need 1 package.

  • FEA-3071 - 22K Gold Plated French Wire Earring Hooks 18MM (25 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5230 - 22K Gold Plated Open Jump Rings 3mm 22 Gauge (x100)
    Project uses 12 pieces. You will need 1 package.

  • FHP-3027 - 22K Gold Plated Ball Head Pins 22 Gauge 1.5 Inch (x20)
    Project uses 12 pieces. You will need 1 package.

  • BGL-08001 - Simulated Ruby Glass Beads, 2.5X3.5mm Faceted Rondelles, 15.5 Inch Strand, Ruby Red
    Project uses 12 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Boho
Ingredients FEA-3071, FJR-5230, FHP-3027,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Findings, French Ear Wire Hook 22mm, Gold Plated (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$4.84 / Package | SKU: FEA-3071
22K Gold Plated Open Jump Rings 3mm 22 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$7.29 / Package | SKU: FJR-5230
Head Pins, with Ball Head 1.5 Inches Long and 22 Gauge Thick, 22K Gold Plated (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$5.09 / Package | SKU: FHP-3027
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed