Glitzy Halloween Kumihimo Bracelet

PROJECT B2433
Designer: Kat Silvia
Skill Level: Intermediate
Austrian crystal bicones spiral in a Halloween color palette of black and orange. Perfect for a glitzy Halloween night out! Now updated with PRESTIGE crystals.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a 6.75" inch bracelet around a mandrel. To modify the length, adjust the length of the braided portion accordingly by adding or subtracting additional seed beads to each strand and each side. Note: You will also need some tape and a toothpick or scrap of wire for this project.
  1. Please watch our video: How to Braid Beaded Kumihimo and Make a Bracelet. In this video you will learn how to do a 8 Strand Kumihimo Bracelet. From what you learned in the video you will cut 8 strands 4 feet in length each.
  2. Gather all 8 cord ends and tie a simple overhand knot tying them all together. Holding the board facing up, thread this knot through the center hole.
  3. Place the cords to the left and right of the 32 dot as well as to the left and right of the 16 dot. You will then want to place a cord to the left and right of the 24 dot and to the left and right of the 8 dot. Attach your weight to the knot after you have positioned your cords.
  4. Now string 16 seed beads, 12 Jet bicones, and 16 seed beads on to the strand that is between the 7 and 8 notch. Repeat for the strands between the 8 and 9 notch, the 23 and 24 notch and the 24 and 25 notch.
  5. Now string 16 seed beads, 12 Fire Opal bicones, and 16 seed beads on to the strand that is between 31 and 32 notch. Repeat for the strands between the 32 and 1 notch; the 15 and 16 notch and the 16 and 17 notch.
  6. Begin the braiding as shown on in the video. Braid about one inch of cord before you begin adding the beads.
  7. Continue braiding until you have added all of your beads, or reached your desired length. Then continue braiding and finish with 1 inch of braiding without beads, same as you did at the beginning.
  8. Carefully take the braid off of the disc, trim the bobbins off and tie an overhand knot.
  9. Finish off the bracelet with tape and glue as seen in the above video. Allow the bracelet to dry overnight, unclasped for maximum bond.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCR-4226 - 22K Gold Plated Magnetic Tube Cord Ends/Clasps - Fits Up To 3.2mm Cord (4 Sets)
    Project uses 1 piece. You will need 1 package.

  • SWBI-1415 - Austrian Crystal, #5328 Bicone Beads 4mm, 24 Pieces, JetProject uses 48 pieces. You will need 2 packages.

  • SWBI-14415 - Austrian Crystal, #5328 Bicone Beads 4mm, 24 Pieces, Tangerine
    Project uses 48 pieces. You will need 2 packages.

  • DMRR-0401F - Miyuki Round Seed Beads, 11/0 Size, 8.5 Gram Tube, #401F Matte Black
    Project uses 256 pieces. You will need 1 package.

  • XCR-4236 - Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - Black / 77 Yard Spool
    Project uses 1 Spool. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-6113 - Kumihimo Round Mini Disc Disk For Japanese Braiding and Cording
  • XTL-6103 - The Beadsmith No Tangle Flexible Plastic Thread Bobbins For Kumihimo Or Macrame 1 7/8 Inch (8 Pack)
  • XTL-6063 - Gator Weight For Kumihimo Braiding - 1.6 Ounces (1)
Additional Information
Theme Halloween
Ingredients FCR-4226, XCR-4236, XTL-1054, JSK-0242, PRES-5328-JET4, PRES-5328-LTAM4,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Magnetic Clasps, Tube Cord Ends Fits 3.2mm Cord, 22K Gold Plated (4 Sets)
You will need 1 package(s).
1 package = 4 Sets.
$5.99 / Package | SKU: FCR-4226
Super-Lon, S-Lon, Cord - Size 18 Twisted Nylon - Black / 77 Yard Spool
You will need 1 package(s).
1 package = 1 Spool.
$4.77 / Package | SKU: XCR-4236
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Toho Round Seed Beads 11/0 49F 'Opaque Frosted Jet' 8 Gram Tube
You will need 1 package(s).
1 package = 1 Tube.
$2.49 / Package | SKU: JSK-0242
PRESTIGE Crystal, #5328 Bicone Bead 4mm, Jet (1 Piece)
You will need 48 package(s).
1 package = 1 Piece.
$0.21 / Package | SKU: PRES-5328-JET4
PRESTIGE Crystal, #5328 Bicone Bead 4mm, Light Amber (1 Piece)
You will need 48 package(s).
1 package = 1 Piece.
$0.21 / Package | SKU: PRES-5328-LTAM4
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

/ Package | SKU: XTL-5700
Gator Weight For Kumihimo Braiding - 1.6 Ounces (1 pcs)

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed