Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- For the earrings, take one head pin and string on one round 8mm round bead. Make a simple wire loop.
- Take one eye pin and string on one 6mm round bead. Make a simple wire loop.
- Take one eye pin and string on one 4mm round bead. Make a simple wire loop.
- Now open the loop of the 8mm bead, same as you would a jump ring, and attach it to the loop of the 6mm bead. Move to the other side of the 6mm bead and attach the loop of the 4mm bead. To the other side of the 4mm bead, attach the earring hook.
- To make the second earring follow the steps above.
- For the necklace begin by cutting three strands of beading wire, 24 inches long each.
- Take one strand and string on one crimp tube thread the wire up through one hammered triangle ring and back down through the crimp tube. Pull snug and leave a tail of about 1 inch. Crimp the crimp tube. Add a crimp cover.
- Repeat the above step for the other two lengths of beading wire.
- To the first strand, string on the beads in this order: one 4mm bead, followed by one 2mm bead. Repeat 83 times, and finish with one 4mm bead. Add a bead stopper to the end of this wire.
- To the second strand, string on the beads in this order: one 6mm bead, followed by one 2mm bead. Repeat 71 times, and finish with one 6mm bead. Add a bead stopper to the end of this wire.
- To the third strand, string on the beads in this order: one 8mm bead, followed by one 2mm bead. Repeat 48 times, and finish with one 8mm bead. Add a bead stopper to the end of this wire.
- Next braid the three strands gently to intertwine them together.
- When you come to the end of the braid, take one strand and remove the bead stopper. String on one crimp tube and thread the wire up through a second hammered triangle ring and back down through the crimp tube. Pull snug and crimp the crimp tube. Add a crimp cover. Trim the wire. You will repeat this step for the other two strands.
- Open one jump ring and attach it to one hammered triangle and to one lobster clasp. Close the jump ring. All done.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BCP-14153 - Czech Fire Polished Glass, Faceted Round Beads 8mm, 20 Pieces, Jet California Gold Rush
Project uses 50 pieces. You will need 3 packages.
- BCP-14145 - Czech Fire Polished Glass, Faceted Round Beads 6mm, 25 Pieces, Jet California Gold Rush
Project uses 73 pieces. You will need 3 packages.
- BCP-14137 - Czech Fire Polished Glass, Faceted Round Beads 4mm, 40 Pieces, Jet California Gold Rush
Project uses 85 pieces. You will need 3 packages.
- BCP-00137 - True2 Czech Fire Polished Glass, Faceted Round Beads 2mm, 50 Pieces, Gold Plated
Project uses 205 pieces. You will need 5 packages.
- FCL-2573 - Bright Gold Plated Lobster Clasps Extra Large 23mm (2)
Project uses 1 piece. You will need 1 package.
- FCR-1714 - BeadSmith Crimp Tubes, 2x2mm, 100 Pieces, Gold Plated
Project uses 6 pieces. You will need 1 package.
- FCR-1071 - 22K Gold Plated Stardust Sparkle Crimp Bead Covers 4mm (144)
Project uses 6 pieces. You will need 1 package.
- FCO-8559 - 22K Gold Plated Connector Link Brushed Triangle 11.5mm (4)
Project uses 2 pieces. You will need 1 package.
- FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
Project uses 1 piece. You will need 1 package.
- FHP-6250 - 22K Gold Plated Open Eye Pins 21 Gauge 1 Inch (x50)
Project uses 2 pieces. You will need 1 package.
- FHP-6305 - 22K Gold Plated Head Pins 1 Inch Long/21 Gauge (50)
Project uses 2 pieces. You will need 1 package.
- FEA-3030 - 22K Gold Plated Long Elegant Earring Hooks 25mm (50)
Project uses 2 pieces. You will need 1 package.
- XCR-69893 - Beadalon Beading Wire Gold Color 19 Strand .018 Inch / 30 Feet
Project uses 6 Feet. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
For closed captions/subtitles, click the CC icon on the video player after starting the video.
Earn Reward Points with your purchase of project components or tools.
