Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
NOTE: These beads are a little bit fragile, so I don't recommend creating a wrapped wire loop on them. Please remember to double these instructions to create your matched pair of earrings.
- Place an Emerald Czech crystal drop pave bead onto a sterling silver 2", 22 gauge head pin and create a simple wire loop after the bead.
- Clip the head off of another head pin. Create a simple wire loop in the end of the head pin. Then slide a emerald rainbow Czech crystal round pave bead onto the pin and create another simple loop after the bead.
- Open one of the loops on the round bead and attach it to the loop on the drop.
- Open the loop on a sterling silver French wire earring hook and hang the free loop on the round bead from it; close the loop.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BMB-2977 -
Project uses 2 pieces. You will need 2 packages.
- BMB-3028 -
Project uses 2 pieces. You will need 2 packages.
- FEA-2010 - Sterling Silver French Wire Earring Hooks (10)
Project uses 2 pieces. You will need 1 package.
- FHP-02320 - Sterling Silver Head Pins 22 Gauge 2 Inches (10)
Project uses 4 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose