Retired - Easter Egg Pearl Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Take one head pin, place onto the headpin one powder rose pearl with the large end of the drop facing down. Make a simple wire loop. Repeat this process with one Lavender pearl and one Light Blue pearl. Set these aside.
2. Cut three pieces of chain in the following measurements: 3/4", 1 1/8", and 1 1/2".
3. Open one jump ring, attach the last link of one end of each chain. Attach the jump ring to the earring finding, close the jump ring.
4. Open the simple wire loop, same as you would a jump ring, of the blue pearl and attach it to the shortest chain (3/4"). Close the wire loop.
5. Open the simple wire loop, same as you would a jump ring, of the lavender pearl and attach it to the second shortest chain (1 1/8"). Close the wire loop.
6. Open the simple wire loop, same as you would a jump ring, of the pink pearl and attach it to the longest chain (1 1/2"). Close the wire loop.
7. You are all done!

• CHA-2401 - 22K Gold Plated 2mm x 2.4mm Cable Chain - By The Foot
  Project uses 6.75 inches. You will need 1 package.


• FJR-3914 - 22K Gold Plated Open Jump Rings 4mm 20 Gauge 22k Gold Plated (100)
  Project uses 2 pieces. You will need 1 package.


• SWP-1113 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Powder Rose
  Project uses 2 pieces. You will need 1 package.


• SWP-1126 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Lavender
  Project uses 2 pieces. You will need 1 package.


• SWP-1131 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Light Blue
  Project uses 2 pieces. You will need 1 package.


• FHP-3020 - 22K Gold Plated 2mm Ball Head Pins 21 Gauge 1.5 Inch (20)
  Project uses 6 pieces. You will need 1 package.


• FEA-3030 - 22K Gold Plated Long Elegant Earring Hooks 25mm (50)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex