Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
- Cut lengths of chain in the following sizes: 3/4 inch, 1 inch, 1 1/2 inch, and 1 3/4 inch. Set aside.
- Take one headpin and string on one blue pearl. Make a wrapped wire loop. Snip any excess wire. Repeat this step for one green, yellow and pink pearl.
- By opening one jump ring attach the pearls to one end of each chain in the following order: 3/4 inch: Pink; 1 inch: Green; 1 1/2 inch: Yellow; 1 3/4 inch: Blue.
- Take one jump ring and string on the ends of the chains attached to the pearls in this order: green, yellow, blue and pink. Close the jump ring around the loop of the earring post.
- Attach the back to the earring post.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- SWP-1105 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Pastel Blue
Project uses 2 pieces. You will need 1 package.
- SWP-1106 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Pastel Green
Project uses 2 pieces. You will need 1 package.
- SWP-1108 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Pastel Rose
Project uses 2 pieces. You will need 1 package.
- SWP-1109 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Pastel Yellow
Project uses 2 pieces. You will need 1 package.
- FEA-1065 - Silver Plated Stud Earrings Ball Post & Ring 6mm (10)
Project uses 2 pieces. You will need 1 package.
- FEA-1013 - Silver Plated Earring Backs (Earnuts) Med. (100)
Project uses 2 pieces. You will need 1 package.
- FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 10 pieces. You will need 1 package.
- CHA-98922 - Silver Plated Fine Figure 8 Cable Chain 3x1.8mm Links - Sold By The Foot
Project uses 10 Inches. You will need 1 package.
- FHP-5420 - Silver Plated Head Pins 2 Inches 24 Gauge (X50)
Project uses 8 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex