Retired - Dark Rainbow Drop Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut a length of chain 1 inch long and set aside.
2. Take one eye pin and thread on one arrow bead. Make a simple wire loop.
3. Open one jump ring and attach it to the pear drop and to the bottom wire loop of the arrow bead (so the arrow is pointing down), and close the jump ring.
4. Move to the other side of the arrow bead and open the wire loop (same as you would a jump ring). Slip on the 1 inch piece of chain. Close the loop.
5. Open the loop of the earring finding and attach it to the other end of the length of chain. Close the loop.
6. All done!

• SWCR-6291 - Austrian Crystal, 6106 Pear Pendant 16mm, 2 Pieces, Crystal Rainbow Dark
  Project uses 2 pieces. You will need 1 package.


• SWCR-5080 - Austrian Crystal, 5748 Arrow Beads 12mm, 2 Pieces, Jet
  Project uses 2 pieces. You will need 1 package.


• CHX-1240 - GenY Chain, Cable Links 1.5x2mm, 1 Inch, 18K Forever Gold
  Project uses 2 Inches. You will need 2 packages.


• FHP-6257 - 22K Gold Plated Open Eye Pins 22 Gauge 1.5 Inch (x50)
  Project uses 2 pieces. You will need 1 package.


• FEA-3030 - 22K Gold Plated Long Elegant Earring Hooks 25mm (50)
  Project uses 2 pieces. You will need 1 package.


• FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
  Project uses 2 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers