Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
- If you are not familiar with how to use wire looping pliers, please watch the video here.
- Place onto a head pin 1 scalloped bead cap facing downwards. Measure 1/4" from the end of the head pin. At the 1/4" point, create a simple wire loop. Snip off excess wire with flush cutters. Repeat this step to create your second "leg" for your angel.
- Take an eye pin and open the loop (the same way you would open a jump ring) and slip onto it the two dangles (legs) you made in the step above. Close the eye pin loop.
- Place onto the eye pin: 1 Austrian crystal dome bead facing downwards, 1 angel wings bead, 1 Austrian crystal round bead, and 1 filigree bead cap facing upwards. Create a simple wire loop after the bead cap. Trim excess wire with flush cutters.
- Open the loop at the base of your earring hook (the same way you would open a jump ring) and link this onto the simple wire loop you just made. Close the loop back up.
- Happy Holidays!
WHAT YOU'LL NEED: (scroll down for purchase options)
- BMB-3290 - TierraCast Fine Silver Plated Pewter Angel Wing Beads 21mm (2)
Project uses 2 pieces. You will need 1 package.
- BMB-3767 - Silver Plated 6mm Bali Style Star Bead Caps (6)
Project uses 2 pieces. You will need 1 package.
- FHP-5320 - Silver Plated Head Pins 2 Inches Long/22 Gauge (X50)
Project uses 4 pieces. You will need 1 package.
- SWC-0601 - Austrian Crystal, 5000 Round Beads 6mm, 10 Pieces, Crystal AB
Project uses 2 pieces. You will need 1 package.
- FHP-6267 - Silver Plated Open Eye Pins 22 Gauge 2 Inch (x50)
Project uses 2 pieces. You will need 1 package.
- SWBB-7791 - Austrian Crystal, 5542 Dome Beads 11mm, 2 Pieces, Crystal AB
Project uses 2 pieces. You will need 1 package.
- FEA-3025 - Silver Plated Long Elegant Earring Hooks (50)
Project uses 2 pieces. You will need 1 package.
- BMB-3287 - TierraCast Fine Silver Plated Pewter Scalloped Bead Caps 3.5mm (12)
Project uses 4 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex