Retired - Crystal Point Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Before you begin, please watch the video on How to Wire Wrap A Briolette.
2. Following what you learned in the video, cut a 2 feet length of wire using your flush cutters. (You may cut more for a "messier" wrap). Thread it through your crystal gemstone bead and create a "Birds Nest" wire wrap. Snip off any excess wire using your flush cutters.
3. Take your length of chain and slide it through the loop on your wire wrapped bead.
4. Next, using your chain nose pliers, open a gold plated jump ring and attach it onto the last link from one side of your 36 inch length chain. Close the jump ring.
5. Open another jump ring and slide it onto the last link from your other side of chain; also slide on the loop from your lobster clasp and close.
6. That's it!

• CHA-99959 - Matte Gold Plated Slim Rolo Chain 2mm Bulk By The Foot
  Project uses 36 inches. You will need 3 packages.


• WNT-2233 - Beadsmith Tarnish Resistant Gold Color Copper Wire 22 Gauge 20 Yards (18.2 Meters)
  Project uses 24 inches. You will need 1 package.


• FCL-2514 - Gold Plated Curved Lobster Clasps 12mm (10 Pieces)
  Project uses 1 piece. You will need 1 package.


• FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
  Project uses 2 pieces. You will need 1 package.


• SPQC-803 - Crystal Quartz Gemstones, Rough Pendants 9.5-68mm, 6 Pieces, Clear
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose