Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
These instructions will give you a 7.5 inch bracelet. To adjust the length simply modify the length of the chain. You will also need two strips of scotch tape for this project.
- For the fist step of this bracelet, please watch our video: How to Make a Four Strand Round Braid. Cut off four lengths of micro-fiber suede cord, 12 inches each. Follow the instructions in the video to complete 3 1/2" of the round braid.
- When you have finished, tape the end and clip off any remaining suede. Repeat on both sides of the braid.
- Take one cord end and add a few drops of Super New Glue. Place the end of the braid into the recess. Repeat on the other side. Set this aside.
- To one end of your 12" length of chain, open one jump ring and attach the closed loop piece of the copper clasp. Close the jump ring.
- Move to the other side of the chain, open one jump ring and attach the chain to one of the end caps that is attached to the braid. Close the jump ring.
- On the other end cap, open one jump ring and attach the hook piece of the clasp to the end cap. Close the jump ring.
- Wrap the bracelet twice and hook your clasp together.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- XCR-43103 - Beadsmith Dark Burgundy Red Faux Leather Suede Beading Cord 9Ft (3 Yd) Spool
Project uses 4 feet. You will need 1 package.
- FCR-2125 - TierraCast Maker's Collection, Taj Cord Ends Fits 6mm, 2 Pieces, Antiqued Copper Plated
Project uses 2 pieces. You will need 1 package.
- FCL-7017 - TierraCast Copper Plated Pewter Vine Hook And Eye Clasp 7mm (1 Set)
Project uses 1 piece. You will need 1 package.
- FJR-3093 - Antiqued Copper Plated Open Jump Rings 6mm 20 Gauge (50)
Project uses 3 pieces. You will need 1 package.
- CHA-9803 - Nunn Design Antiqued Copper Plated Textured Cable Chain By The Ft
Project uses 12 Inches. You will need 1 package.
- XTL-1059 - Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp