Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
NOTE: You will need a pair of disposable gloves for this project
- Before starting this project, please watch the video: How to Use Crystal Clay
- Mix up a pea size amount of part A and a pea size amount of part B Violet Crystal Clay (equal amounts) as seen in the video. Mix for 4 minutes until all striations are gone.
- Pinch off a small bit of the clay you just mixed and flatten it with your fingers. Press into the base of your silver plated 21mm bezel ring. Place the Austrian crystal Crytsal 20mm cosmic ring in light vitrail directly on top of the clay and press down.
- Roll your remaining mixed clay from step 1 into a ball. Place that ball into the center of the cosmic ring. Press down slightly and smooth out gently with your finger.
- Take your Magic Pick and place your Austrian Crystal chatons in crystal AB directly into the clay ball you just placed. Press them into the clay so that the top edge of the crystal is just under the surface edge of the clay. I chose to place them in an orderly fashion by making a row of chatons nearest to the cosmic ring and then worked my way towards the center of the clay ball. However, you can place your chatons anyway you like.
- Once all of your chatons are placed, lightly tap the surface of the chatons/clay with your finger to make sure all the stones are set.
- Let cure in an upright position for 24 hours.
- Enjoy your new ring!
WHAT YOU'LL NEED: (scroll down for purchase options)
- FRG-0780 - Silver Plated Round Bezel Adjustable Ring 21mm (1)
Project uses 1 piece. You will need 1 package.
- SWC-9027 - Austrian Crystal, 4139 Cosmic Ring Pendant 20mm, 1 Piece, Crystal Vitrail Light
Project uses 1 piece. You will need 1 package.
- SWCH-52401 - Austrian Crystal, 1088 Xirius Round Stone Chatons pp24, 36 Pieces, Crystal AB F
Project uses 11 pieces. You will need 1 package.
- TRC-250 - Crystal Clay 2-Part Epoxy Clay Kit 'Violet' 25 Grams
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-4004 - Beadsmith Magical Rhinestone Pick Up Tool With Cleaning Kit - Great For Placing Flatback Rhinestones