Retired - Cloud Dancer Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Take a 3", 21 gauge silver plated ball head pin and place onto it a 3mm air blue opal Austrian crystal bicone bead, a silver plated twisted tube bead, another bicone bead, another tube bead, another bicone bead, another tube bead, and another bicone bead.
2. Make a simple wire loop above the last bicone bead.
3. Repeat steps 1 and 2 three more times.
4. Take a 2", 21 gauge silver plated eye pin and place onto it a bicone bead, a tube bead, another bicone bead, another tube bead, and another bicone bead.
5. Create a simple wire loop above the last bicone bead.
6. Open the loop on one end of the eye pin and hang a silver plated pewter pegasus charm from it, then close it back up.
7. Place two bicone beads onto another eye pin and create a simple wire loop after the beads.
8. Place one bicone bead onto another eye pin and create a simple wire loop after the bead. Repeat once.
9. Hang the eye pin the the pegasus bead from the eye pin with two bicone beads. Hang this from the center loop on a silver plated pewter 3-strand classic reducer bead bar.
10. Hang one of the head pins with beads from one of the eye pins with one bicone bead. Repeat with a second head pin and the other eye pin. Hang these to either side of the first piece on the center loop of your reducer.
11. Hang the two remaining head pins with beads from the side loops on either side of the reducer.
12. Open the loop on a silver plated long elegant earring hook and hang the earring from the loop, then close it back up.

• PND-5233 -
  Project uses 2 pieces. You will need 2 packages.


• FCO-4709 -
  Project uses 2 pieces. You will need 1 package.


• BMB-5317 - Bright Silver Plated Twisted Tube Beads 13mm (72 Beads)
  Project uses 28 pieces. You will need 1 package.


• SWBB-13094 - Austrian Crystal, 5328 Bicone Beads 3mm, 25 Pieces, Air Blue Opal
  Project uses 46 pieces. You will need 2 packages.


• FHP-3003 - Silver Plated 2mm Ball Head Pins 21 Gauge 3 Inches (x20)
  Project uses 8 pieces. You will need 1 package.


• FHP-6261 - Silver Plated Open Eye Pins 21 Gauge 2 Inch (x50)
  Project uses 8 pieces. You will need 1 package.


• FEA-3025 - Silver Plated Long Elegant Earring Hooks (50)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose