Retired - Christmas Wishes Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Before you begin, watch the video: How to Apply Collage Images to Nunn Design Channel Bead Cores.
2. Cut the graphic that says "May Christmas joys be many" from your Nunn Design "Winter Holiday" collage sheet, and apply it to an antique 22k gold plated channel bead pendant as demonstrated in the video. Have the left edge overlap the right edge of the collage image so that the written message is not cut off.
3. Allow the glue and sealant to dry before moving on.
4. Open the loop on your channel bead pendant and insert both end links in a 3' length of Nunn Design antique gold plated oval cable chain. Close the loop.
5. Use a 6mm gold plated jump ring to hang an antique silver plated pewter Saint Nick charm from the 4th link on the left side of the chain from the channel pendant.
6. Place a 6mm round Czech fire polish light garnet bead onto a 22k gold plated 1", 21 gauge head pin. Create a simple wire loop after the bead.
7. Use the wire loop you created to hang the bead from the same link as the charm, just above the charm.

• PND-5641 - TierraCast Antiqued Silver Plated Lead-Free Pewter Charm Saint Nick Santa Claus 22mm (1)
  Project uses 1 piece. You will need 1 package.


• XTL-9507 - Nunn Design Collage Sheet Winter Holiday Christmas Theme For Scrapbook - Fits Nunn Designs
  Project uses 1 sheet. You will need 1 package.


• PND-6970 - Nunn Design Antiqued 22K Gold Plated Channel Bead Pendant 32mm (1)
  Project uses 1 piece. You will need 1 package.


• CHA-9814 - Nunn Design Antiqued Gold Plated Oval Cable Chain 3mm By The Foot
  Project uses 3 feet. You will need 3 packages.


• BCP-3625 -
  Project uses 1 piece. You will need 1 package.


• FHP-6305 - 22K Gold Plated Head Pins 1 Inch Long/21 Gauge (50)
  Project uses 1 piece. You will need 1 package.


• FJR-5260 - 22K Gold Plated 6mm 19 Gauge Open Jump Rings (100)
  Project uses 1 piece. You will need 1 package.


• XTL-1031 - Nunn Design Glue Adhesive 2 oz. - For Patera Findings (1)
  Project uses 1 bottle. You will need 1 package.


• XTL-1032 - Nunn Design Sealant Protectant 2 oz. - For Patera Findings (1)
  Project uses 1 bottle. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose