Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
These instructions will make a 20 inch necklace. For a longer or shorter necklace, adjust the number of inches of chain you purchase.
- Cut two 9 inch lengths of chain.
- Open a jump ring. Slide on the last link of one piece of chain, and also one hole of the rose gold brushed chevron pendant. Close the jump ring.
- Open another jump ring. Slide on a link of chain 1/2 inch from where the jump ring from the previous step is attached, and also one hole of the yellow gold brushed chevron pendant. Close the jump ring.
- Open another jump ring. Slide on a link of chain 1/2 inch from where the jump ring from the previous step is attached, and also one hole of the silver brushed chevron pendant. Close the jump ring.
- Take your second piece of chain and line it up against the other side of the pendants. Open a jump ring. Slide on the last link of the second piece of chain, and also the second hole of the rose gold brushed chevron pendant. Close the jump ring.
- Open another jump ring. Slide on a link of chain 1/2 inch from where the jump ring from the previous step is attached, and also the second hole of the yellow gold brushed chevron pendant. Close the jump ring.
- Open another jump ring. Slide on a link of chain 1/2 inch from where the jump ring from the previous step is attached, and also the second hole of the silver brushed chevron pendant. Close the jump ring.
- Open a jump ring and slide on the first link of chain on one side of your necklace. Close the jump ring.
- Open another jump ring. Slide on the first link of chain on the other side of your necklace, and also the loop of your clasp. Close the jump ring.
- Close the clasp, and you're finished!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-12032 - GenY Link, Chevron 25x9mm, 1 Piece, Brushed Forever Silver
Project uses 1 piece. You will need 1 package.
- PND-12019 - GenY Link, Chevron 25x9mm, 1 Piece, Brushed 18K Forever Gold
Project uses 1 piece. You will need 1 package.
- PND-12041 - GenY Link, Chevron 25x9mm, 1 Piece, Brushed Forever Rose Gold
Project uses 1 piece. You will need 1 package.
- CHX-1231 - GenY Chain, Saturn with Oval Cable Links 1.5x2mm, 1 Inch, 18K Forever Gold
Project uses 18 inches. You will need 18 packages.
- FJR-1340 - GenY Jump Rings, Open 4mm 21 Gauge, 10 Pieces, 18K Forever Gold
Project uses 8 pieces. You will need 1 package.
- FCL-2509 - Beautiful Gold Plated Curved Lobster Clasps 8mm (10)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex