Retired - Chakra Amethyst Gemstone Bracelet

Retired - Chakra Amethyst Gemstone Bracelet

Name: Retired - Chakra Amethyst Gemstone Bracelet
Brand: Beadaholique
SKU: B809
Availability: OutOfStock

PROJECT B809

Designer: Julie Bean

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

Featuring a detailed root symbol chakra focal, this purple and gold bracelet is a lovely meaningful accessory. The beads are dog teeth amethyst gemstones and hematite.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Please note that the instructions below are for a 6 1/4 inch bracelet when worn, 7 inches when laid flat. If you want to make the bracelet longer you will definitely have enough supplies in this project without having to purchase anything extra. Simply extend the pattern that is described below.

To start this project, cut 12 inches of beading wire. Place a bead stopper on one end. leaving a tail of 4 inches. Start by placing a crimp tube onto the beading wire.
Next string on: 1 6mm round amethyst bead, 1 round hematite bead, 1 bead cap (facing outwards), 1 8mm round amethyst bead, 1 bead cap (facing inwards), 1 round hematite bead. Repeat this exact sequence another 2 times.
String on another 6mm round amethyst bead and an other crimp tube. Loop the end of the beading wire through the loop on one side of your connector link and bring it back around down through your crimp tube. Crimp the crimp tube, trim off the excess wire, and place a crimp tube cover over it.
Go back to the starting point of this strand and remove the bead stopper. Loop the end of the beading wire through the loop on one half of your magnetic clasp and bring it back around down through your crimp tube. Crimp the crimp tube, trim off the excess wire, and place a crimp tube cover over it.
Repeat all the previous steps on the other side of your bracelet to complete the design.
Enjoy!

WHAT YOU'LL NEED: (scroll down for purchase options)

FCO-093 - Chakra Components, Muladhara / Root Symbol Connector Link 24.5x19.5mm, 2 Pieces, Gold Plated
Project uses 1 piece. You will need 1 package.

BMB-3491 - TierraCast 22K Gold Plated Pewter Hammered Bead Caps 6mm (x 8)
Project uses 12 pieces. You will need 2 packages.

SPAM-102 - Dakota Stones Gemstone Beads, Dog Teeth Amethyst, Round 6mm, 8 Inch Strand
Project uses 8 pieces. You will need 1 package.

SPAM-103 - Dakota Stones Gemstone Beads, Dog Teeth Amethyst, Round 8mm, 8 Inch Strand
Project uses 6 pieces. You will need 1 package.

SPHE-112 - Hematite Gemstone Beads, Faceted Round 2mm, 6 Inch Strand, Metallic Gold
Project uses 12 pieces. You will need 1 package.

FCR-1714 - BeadSmith Crimp Tubes, 2x2mm, 100 Pieces, Gold Plated
Project uses 2 pieces. You will need 1 package.

FCR-1056 - Bright Gold Tone Crimp Bead Covers 3mm (144)
Project uses 2 pieces. You will need 1 package.

XCR-69543 - Beadalon Wire Satin Gold 19 Strand .015 Inch / 30Ft
Project uses 12 inches. You will need 1 package.

FCL-6682 - 22K Gold Plated Magnetic Clasps 6mm x 8mm (3)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers

Additional Information

Theme	Yoga
Ingredients	BMB-3491, SPAM-102, SPAM-103, FCR-1714, FCR-1056, XCR-69543, FCL-6682,

Useful Techniques & Learning Guides

How to Use Crimp Beads

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

TierraCast 22K Gold Plated Pewter Hammered Bead Caps 6mm (8 Pieces)

            TierraCast 22K Gold Plated Pewter Hammered Bead Caps 6mm (8 Pieces)
        
You will need 2 package(s).
1 package = 8 Pieces.

                $4.74
            
             / Package | SKU: BMB-3491

Dakota Stones Gemstone Beads, Dog Teeth Amethyst, Round 6mm, 8 Inch Strand

            Dakota Stones Gemstone Beads, Dog Teeth Amethyst, Round 6mm, 8 Inch Strand
        
You will need 1 package(s).
1 package = 1 Strand.

                $7.99
            
             / Package | SKU: SPAM-102

Sold out

Dakota Stones Gemstone Beads, Dog Teeth Amethyst, Round 8mm (8 Inch Strand)

            Dakota Stones Gemstone Beads, Dog Teeth Amethyst, Round 8mm (8 Inch Strand)
        
You will need 1 package(s).
1 package = 1 Strand.

                $8.99
            
             / Package | SKU: SPAM-103

Sold out

The Beadsmith Crimp Beads, Tube 2x2mm, Gold Plated (100 Pieces)

            The Beadsmith Crimp Beads, Tube 2x2mm, Gold Plated (100 Pieces)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $1.99
            
             / Package | SKU: FCR-1714

Sold out

Crimp Bead Covers, 3mm, Gold Tone (144 Pieces)

            Crimp Bead Covers, 3mm, Gold Tone (144 Pieces)
        
You will need 1 package(s).
1 package = 144 Pieces.

                $7.59
            
             / Package | SKU: FCR-1056

            Beadalon Wire "Satin Gold" 19 Strand .015 Inch / 30Ft
        
You will need 1 package(s).
1 package = 1 Spool.

                $13.99
            
             / Package | SKU: XCR-69543

Magnetic Clasps, Round 8x6mm 22K Gold Plated (3 Set)

            Magnetic Clasps, Round 8x6mm 22K Gold Plated (3 Set)
        
You will need 1 package(s).
1 package = 3 Sets.

                $10.15
            
             / Package | SKU: FCL-6682