Retired - Canary Song Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Using a toothpick or scrap of wire place a dab of glue into the pendant setting and place one buttercup rivoli into the setting. Set aside and allow to dry.
2. Place a dab of glue, into two of the link settings. Place one buttercup into one, and place one majestic blue into the other. Set aside and allow to dry.
3. Allow the settings to dry for at least 15 minutes before continuing.
4. Next, open one jump ring and attach it to the pendant setting and to one blue link. Close the jump ring.
5. Open another jump ring and attach it to the link you just added and to one buttercup link. Close the jump ring.
6. Open one more jump ring to attach the earring post to the last buttercup link that you added. Close the jump ring.
7. We recommend that you allow the earrings to dry for at least 24 hours before wearing.

• SWCR-4445 - Austrian Crystal, 1122 Rivoli Fancy Stones 14mm, 2 Pieces, Crystal Buttercup
  Project uses 4 pieces. You will need 2 packages.


• SWCR-4448 - Austrian Crystal, 1122 Rivoli Fancy Stones 14mm, 2 Pieces, Majestic Blue Sf
  Project uses 2 pieces. You will need 1 package.


• FCO-9162 - TierraCast Rhodium Plated Pewter Faceted Setting For Austrian crystal 14mm Rivoli (2)
  Project uses 4 pieces. You will need 2 packages.


• PND-5694 - TierraCast Rhodium Plated Pewter Faceted Pendant Setting For 14mm Rivoli (2)
  Project uses 2 pieces. You will need 1 package.


• FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 6 pieces. You will need 1 package.


• FEA-1528 - TierraCast Rhodium Plated Pewter Stud Post Earrings Hammered 13.5mm 1 Pair
  Project uses 1 Pair. You will need 1 package.


• FEA-1016 - Bullet Clutch Earring Backs, Hypo Allergenic with Pad 7x11mm, 50 Pieces, Silver Tone
  Project uses 2 pieces. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 piece. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers