Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This ring memory wire has a diameter at 3/4". It will bend open like a spring but will be a sung fit. Feel free to adjust by adding more loops and beads to this design.
- Please watch our video: How to Use Memory Wire Glue In Ends. From what you learned in the video, string on one 4mm bead, add glue and then add one end cap. Press them together to secure the end. Allow to dry.
- Then to the other end string on 12 more beads
- Finally trim the end of the memory wire with the memory wire cutters so you have about 1/4 inch. Carefully add a dab of glue to the end, add one more bead and add a memory wire end. You may need to hold it in place for a few minutes for the bond to take. But be sure to let dry for 24 hours for maximum bond.
WHAT YOU'LL NEED: (scroll down for purchase options)
- WXM-208 - Memory Wire, Ring Round 0.75 Inch Diameter, 48 Loops, Gold Plated
Project uses 1 Loop. You will need 1 package.
- BCP-207 - Czech Fire Polished Glass Beads, Faceted Round 4mm, 40 Pieces, Etched Crystal California Gold Rush
Project uses 14 pieces. You will need 1 package.
- FCR-0102 - End Cap Beads for Memory Wire, Round Glue In 3mm Diameter, 20 Pieces, Gold Plated
Project uses 2 pieces. You will need 1 package.
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5610 - Xuron Memory Wire Cutters Cutting Pliers -Strong & Easy