Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- The making of this locket is shown from start to finish in the video: How to Make a Mixed Media Collage Art Locket
- Please watch the video and make the locket as shown.
- Thread one end of your chain through the locket's bail.
- The chain itself consists of numerous open link that can be used just like jump rings. Open the end link and connect it to the loop on your toggle bar. Close the link back up. Go to the other side of your chain and repeat this step with the other half of your clasp.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- BGL-9035 - Clear Glass Cabochon Round Bead Crystal Magnify 1 Inch (2)
Project uses 1 piece. You will need 1 package.
- XTL-9458 - Beadsmith Collage Sheet Middle Eastern Art 35mm Circles (1 Sheet)
Project uses 1 piece. You will need 1 package.
- XTL-1020 - JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
Project uses 1 piece. You will need 1 package.
- XTL-1026 - Crafter's Pick The Ultimate Permanent Glue Cement Adhesive 4 OZ
Project uses 1 piece. You will need 1 package.
- TRC-247 - Crystal Clay 2-Part Epoxy Clay Kit 'Sage' 25 Grams
Project uses 1 piece. You will need 1 package.
- SWCH-11022 - Austrian Crystal, 1028 Xilion Round Stone Chatons pp10, 50 Pieces, Aqua
Project uses 12 pieces. You will need 1 package.
- SWCH-52422 - Austrian Crystal, 1088 Xirius Round Stone Chatons pp24, 36 Pieces, Aqua
Project uses 26 pieces. You will need 1 package.
- CHA-9807 - Nunn Design Antiqued Copper Plated Textured Cable Chain By The Ft
Project uses 2 feet. You will need 2 packages.
- FCL-7109 -
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose