Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
These instructions will give you a bracelet that is 6.25". To modify the size, simply add or subtract the number for floral units respectively.
- Begin by cutting off about 12 inches of beading wire. Place a bead stopper 2 inches from one end.
- String on beads in this order: 1 round druk, 1 gold flower, 1 hematite flower, and 1 silver flower. Repeat this pattern 20 more times and end with 1 more round druk.
- String on one crimp tube and one end of the magnetic clasp. Thread the wire back though the crimp tube and pull snug. Crimp the crimp tube. Trim the wire and add a crimp cover.
- Move to the other side of the bracelet, remove the bead stopper and repeat the above step to add the crimp tube, clasp and crimp cover.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- BCP-20507 - Czech Preciosa Glass, Forget Me Not Flower Spacer Beads 5mm, 72 Pieces, Hematite
Project uses 21 pieces. You will need 1 package.
- BCP-20500 - Czech Preciosa Glass, Forget Me Not Flower Spacer Beads 5mm, 72 Pieces, Full Silver
Project uses 21 pieces. You will need 1 package.
- BCP-20508 - Czech Preciosa Glass, Forget Me Not Flower Spacer Beads 5mm, 72 Pieces, Full Gold
Project uses 21 pieces. You will need 1 package.
- BCP-00233 - True2 Czech Glass, Round Druk Beads 2mm, 200 Pieces, Matte Jet Black
Project uses 22 pieces. You will need 1 package.
- XCR-5143 - Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, 30 Feet, Satin Silver
Project uses 12 Inches. You will need 1 package.
- FCR-1715 - BeadSmith Crimp Tubes, 2x2mm, 100 Pieces, Silver Plated
Project uses 2 pieces. You will need 1 package.
- FCR-1093 - Silver Plated Crimp Bead Covers 3mm (50)
Project uses 2 pieces. You will need 1 package.
- FCL-6808 - Silver Plated Magnetic Clasps 6 x 4.5mm (4 Sets)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material