Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
NOTE: If you purchase just 1 more foot of each of the 3 SilverSilks lengths and 1 more pair of pinch end caps (FCR-7032) then you can make a matching necklace. The necklace is project N702 and can be found here.
- To make this project, please watch the video: How to Use SilverSilk Pinch End Caps and Make a Bracelet.
- The entire project is demonstrated in the video above.
- If you plan on making the necklace too, then start by making the necklace and use your leftover SilverSilk to make the bracelet - do not pre-cut any of your lengths.
WHAT YOU'LL NEED: (scroll down for purchase options)
- CHA-10012 - SilverSilk Capture 3mm Copper Knit Wire W/ Silver Ball Chain Core - By The Foot
Project uses 8 inches. You will need 1 package.
- CHA-10019 - SilverSilk Capture 3mm Silver Knit Over Silver Ball Chain Core - By The Foot
Project uses 8 inches. You will need 1 package.
- CHA-10014 - SilverSilk Capture 3mm Gold Knit Wire Over Silver Ball Chain Core - By The Foot
Project uses 8 inches. You will need 1 package.
- FCL-2522 - Beautiful Silver Plated Curved Lobster Clasps 15mm (10)
Project uses 1 piece. You will need 1 package.
- FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
Project uses 2 pieces. You will need 1 package.
- FJR-5170 - Silver Plated Open Jump Rings 7mm 20 Gauge (x100)
Project uses 1 piece. You will need 1 package.
- FCR-7032 - SilverSilk Findings 3-Strand Pinch End Caps - Silver Plated 12x12mm (2)
Project uses 2 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-0074 - Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose