Click or scroll to zoom
Tap or pinch to zoom
Retired - Blackheart Earrings
Click or scroll to zoom
Tap or pinch to zoom
Retired - Blackheart Earrings
Retired - Blackheart Earrings

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Blackheart Earrings

Store Closing, Limited Stock
PROJECT E7031
Designer: Rachel Zaimont
Skill Level: Beginner
Edgy studded faux suede cord fits perfectly into silver Nunn Design bezels, creating a pair of earrings that radiate rocker chic.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
  1. Take the black studded faux suede cord from the package and hold it against one Nunn Design rectangle bezel. Using flush cutters, cut a piece of cord measuring about 1 1/16 inches that will fit into the bezel.
  2. Line the inside of the bezel with Hypo Cement glue. Press the piece of cord into the bezel so it fits snugly inside. Let the glue dry for a few hours.
  3. Open an earring hook and slide the loop at the top of the bezel onto it, so the studded suede is facing forward.
  4. Enjoy your earrings!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-1341 - BeadSmith Studded Faux Suede, Jewelry Cord Assortment 5mm Wide, 8 Meters Total, Cools Mix
    Project uses 3 inches. You will need 1 package.

  • PND-08277 - Nunn Design Charm, Itsy Rectangle Bezel 6x32mm, 2 Pieces, Silver
    Project uses 2 pieces. You will need 1 package.

  • XTL-1001 - G S Hypo Cement Precise Applicator Essential!
    Project uses 1 piece. You will need 1 package.

  • FEA-6700 - Silver Plated Earring Hooks Kidney Wires 25mm (10 Pairs)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Under $20 - Designer Picks
Ingredients PND-08277, XTL-1001, FEA-6700,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: PND-08277
You will need 1 package(s).
1 package = .
/ Package | SKU: XTL-1001
You will need 1 package(s).
1 package = .
/ Package | SKU: FEA-6700
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:
/ Package | SKU: XTL-5600

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed