Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- We are going to start by making the necklace. Cut 24 inches of beading wire and string the tip through a crimp bead.
- String on your clasp then loop the beading wire back through the crimp bead (you want a short tail of about 3 inches of beading wire). Pull snug so that you have a small loop.
- Using your crimp pliers, crimp your crimp bead. Snip off any excess beading wire from the short tail using your flush cutter.
- String your beads onto your wire starting with one large black bead followed by three small black/white beads. Repeat this sequence 10 more times followed by a large black bead at the end.
- Once you've strung all your beads, take the end of your wire and string it through another crimp bead. Add a jump ring and loop the wire back into the crimp bead.
- Using your crimp pliers, crimp your crimp bead. Snip off any excess beading wire. Your necklace is now ready.
- For the earring, please follow the instructions below, remembering to repeat all instructions to make the second earring.
- Take your head pin and string on one black and white bead, one large black bead, followed by another black and white bead.
- Once the beads are on, make a simple wire loop after the last bead using your round nose pliers.
- Open up the loop in your earring hook (like you would a jump ring) and attach it to the simple wire loop and close. Your earring is ready.
- Enjoy your cool mod necklace and earring set!
WHAT YOU'LL NEED: (scroll down for purchase options)
- XCR-67233 - Beadalon Wire Satin Silver 7 Strand .012 Inch / 30Ft
Project uses 24 inches. You will need 1 package.
- BPL-0109 - Acrylic Round Chessboard Faceted Beads Jet Black 18mm (10 Pieces)
Project uses 14 pieces. You will need 2 packages.
- BCP-10352 - Czech Fire Polished Glass Beads 6mm Round - Black/White (25)
Project uses 37 pieces. You will need 2 packages.
- FCL-1005 - Sterling Silver Large Balloon Curved Lobster Clasp 23mm X 11mm (1)
Project uses 1 piece. You will need 1 package.
- FCR-1215 - Beadalon Silver Plated Crimp Tubes 2x1.8mm 1.3mm ID (75 Beads)
Project uses 2 pieces. You will need 1 package.
- FHP-5325 - Silver Plated Head Pins 2 Inches/21 Gauge (X50)
Project uses 2 pieces. You will need 1 package.
- FEA-3015 - Silver Plated Fishhooks Earring Hooks (50)
Project uses 2 pieces. You will need 1 package.
- FJR-5180 - Silver Plated Open Jump Rings 8mm - 18 Gauge (100)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose