Retired - Baroque Christmas Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Take 1 sterling silver head pin and string 1 emerald green Austrian crystal crystal baroque bead. Using pliers, make a simple wire loop.
2. Open the wire loop you made in the previous step the same way you would open a jump ring. Slide it through the loop inside the upper corner of the sterling silver teardrop pendant. Close the wire loop.
3. Open the loop of an earring wire. Slide the top loop of the teardrop pendant onto the earring wire, from the end of the wire toward the loop. Close the loop. Enjoy your earrings!

• SWCR-5240 - Austrian Crystal, 5058 Baroque Bead 10mm, 2 Pieces, Emerald
  Project uses 2 pieces. You will need 1 package.


• FCO-098 - Teardrop Shaped Open Frame Link, with Two Rings 32.5x20mm, 1 Piece, Sterling Silver
  Project uses 2 pieces. You will need 2 packages.


• FEA-012 - French Ear Wire, with 1.5mm Ball End 27x11mm, 4 Pieces, Sterling Silver
  Project uses 2 pieces. You will need 1 package.


• FHP-02315 - Sterling Silver Head Pins 22 Gauge 1.5 Inch (10)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex