Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This finished necklace is about 16 inches at the smallest and hangs to about 24 inches. To adjust the length simply adjust each strand equally. There is not set pattern for the placement of the beads. String them in any order you choose alternating between 8mm, 6mm and seed bead mixed beads.
- Cut a length of beading wire 20 inches. Place a bead stopper two inches from one end.
- String on 16 inches of beads.
- Then string on one crimp tube. Thread the wire through the first loop of the tube clasp and back down through the crimp tube. Pull snug. Crimp the crimp tube. Snip any excess wire. Add a crimp cover.
- Move to the other side of this strand, remove the bead stopper and repeat the above step.
- This completes one strand. You will add the remaining strands in the following order:
- Cut 21" of beading wire; 17" of beading
- Cut 22" of beading wire; 18.5" of beading
- Cut 24" of beading wire; 19.75" of beading
- Cut 25" of beading wire; 21" of beading
- Cut 27" of beading wire; 22.5" of beading
- Cut 28" of beading wire; 24" of beading
- You may need to adjust the lengths slightly to get it to lay the way you want. Start with the smallest and build your way down.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- BCP-9957 - Sale! Czech Seed Bead Mix Lot Variety Shapes Cobalt Blue (2 oz.)
Project uses 1 Mix. You will need 1 package.
- BCP-3853 - Czech Fire Polished Glass Beads 8mm Round Blue Tones Mix (50)
Project uses 1 Strand. You will need 1 package.
- BCP-7653 - Czech Glass Druk 6mm Round Blue Tones Mix (50 Beads)
Project uses 1 Strand. You will need 1 package.
- FCR-1215 - Beadalon Silver Plated Crimp Tubes 2x1.8mm 1.3mm ID (75 Beads)
Project uses 14 pieces. You will need 1 package.
- FCR-1053 - Shiny Silver Tone Crimp Bead Covers 3mm (x144)
Project uses 14 pieces. You will need 1 package.
- FCL-5514 - Silver Tone Tube Clasp 41.5mm Seven Rings Strands (2)
Project uses 1 piece. You will need 1 package.
- XCR-5143 - Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, 30 Feet, Satin Silver
Project uses 1 Spool. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material