Retired - Anwell Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Please watch the video: How to Use the Ring Weaver Tool by Beadalon. Follow along with the video to assemble your Ring Weaver Tool, placing your pegs in the holes designated for a size 6 ring.
2. Use flush cutters to cut 35 inches of 24 gauge silver craft wire and load it onto the Ring Weaver Tool as shown in the video. Follow along with the video to create a 3 layer ring.
3. To attach your heart charm, use pliers to open a 4mm jump ring and string on the loop of your charm. Also string on your woven ring by sliding the jump ring through the underside of one of your warps, so that the charm hangs in the center (see photo for reference).
4. Prepare your chain dangles by using flush cutters to cut 10 lengths of cable chain and 5 lengths of heart link chain that are each 1.25 inches long.
5. To attach your chain dangles, open a 4mm jump ring and string on the end links of 2 cable chains and 1 heart link chain. Also string on your woven ring by sliding the jump ring through the outer weave of the warp at the bottom of the hoop centered below your heart charm (see photo for reference).
6. Repeat the above step 4 more times to attach chain dangles from the 2 adjacent warps on either side of the center dangle you just attached.
7. To attach your earring hook, open the loop of your earring hook the same way you would open a jump ring. String the loop onto the outer portion of the same warp from which you attached the heart charm (see photo for reference). Enjoy your Earrings!

• CHA-10058 - Bright Silver Plated Delicate Cable Chain 2.5 x 1.5mm - Bulk By The Foot
  Project uses 26 inches. You will need 3 packages.


• CHA-9982 - Gun Metal Heart Link Cable Chain 3.2mm - Bulk By The Foot
  Project uses 13 inches. You will need 2 packages.


• WCR-2430 - Artistic Wire, Silver Plated Craft Wire 24 Gauge Thick, 10 Yard Spool, Tarnish Resistant Silver
  Project uses 70 inches. You will need 1 package.


• FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
  Project uses 10 pieces. You will need 1 package.


• FEA-3025 - Silver Plated Long Elegant Earring Hooks (50)
  Project uses 2 pieces. You will need 1 package.


• PND-09018 - TierraCast Celtic Collection, 'Tracys' Celtic Heart Charm 13x14mm, 2 Pieces, Antiqued Silver
  Project uses 2 pieces. You will need 1 package.

• XTL-3308 - Beadalon Ring Weaver Tool, Aluminum Base with 18 Pins, Makes Sizes 4 / 6 / 9 & 11
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose