Retired - Antoinette Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut 12 inches of beading wire.
2. Place a bead stopper at one end. String on beads in this order: five 5mm pearls, one saucer bead, one 8mm gemstone bead, one saucer bead, five 5mm pearls, one saucer bead, 8mm gemstone bead, one donut bead, 8mm gemstone bead, one donut bead, 8mm gemstone bead, one donut bead, 8mm gemstone bead, one saucer bead, five 5mm pearls, one saucer bead, one 8mm gemstone bead, one saucer bead, and five 5mm pearls.
3. Take this wire and string on one crimp tube. Thread the wire up through the loop of the bar portion of the toggle clasp and back through the crimp tube. Pull snug, crimp the crimp tube. Trim the excess wire. Add a crimp cover. Move to the other side of this strand, remove the bead stopper and repeat.
4. Cut 12 inches of beading wire.
5. Place a bead stopper at one end. String on beads in this order: three 5mm pearls, one saucer bead, three 5mm pearls, one saucer bead, four 8mm gemstone beads, one donut bead, three 10mm pearls, one donut bead, four 8mm gemstone beads, one saucer bead, three 5mm pearls, one saucer bead, and three 5mm pearls.
6. Take this wire and string on one crimp tube. Thread the wire up through the loop of the circle portion of the toggle clasp and back through the crimp tube. Pull snug, crimp the crimp tube. Trim the excess wire. Add a crimp cover. Move to the other side of this strand, remove the bead stopper and repeat.
7. All done!

• XCR-67833 - Beadalon Wire Satin Silver 7 Strand .018 Inch / 30Ft
  Project uses 24 inches. You will need 1 package.


• SPQR-108 - Matte Rose Quartz Gemstone Round Pink Beads 8mm (15.5 Inch Strand)
  Project uses 14 pieces. You will need 1 package.


• SWP-1076 - Austrian Crystal, 5810 Round Faux Pearl Beads 10mm, 10 Pieces, Pearlescent White
  Project uses 3 pieces. You will need 1 package.


• SWP-5076 - Austrian Crystal, 5810 Round Faux Pearl Beads 5mm, 50 Pieces, Pearlescent White
  Project uses 32 pieces. You will need 1 package.


• BMB-5023 - Sterling Silver Round Donut Rondelle Beads 6mm (6)
  Project uses 5 pieces. You will need 1 package.


• BMB-5025 - Sterling Silver Small Rounded Saucer Beads 3.3mm (12)
  Project uses 10 pieces. You will need 1 package.


• FCL-3020 - Sterling Silver Round Hammered Texture Toggle Clasp Set - 14mm Diameter (1 Set)
  Project uses 1 piece. You will need 1 package.


• FCR-01002 - Sterling Silver Crimp Bead Covers 3mm (12)
  Project uses 4 pieces. You will need 1 package.


• FCR-01122 - Sterling Silver Crimp Beads 2 x 2mm (20)
  Project uses 4 pieces. You will need 1 package.

• XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material