Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
- Begin by taking your Vintaj relief block and brushing it across the top and sides of three bead caps to bring out the gold leaves in the design. Also, take the block to the top side of the 2 hole connector bead.
- Take one head pin and string on one glass bead and one bead cap. Make a simple wire loop.
- Attach this loop to one loop of the connector bead, by opening and closing it, same as you would a jump ring.
- Take one eye pin and string on one bead cap, one glass bead, and one bead cap. Make a simple wire loop.
- Attach one loop to the loop of the connector bead and attach the other loop the the loop of the ear wire.
- All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- BMB-4250 - Vintaj Natural Brass 8x4mm Foliage Bead Caps with Leaf Design (6)
Project uses 6 pieces. You will need 1 package.
- BCP-7845 - Czech Glass Druk Round Beads 8mm Dark Amethyst (25)
Project uses 4 pieces. You will need 1 package.
- FCO-4666 - Vintaj Natural Brass Mediterranean Shield 2 Hole Connector Beads 16 x 10mm (2)
Project uses 2 pieces. You will need 1 package.
- FHP-5522 - Vintaj Natural Brass Head Pins 21 Gauge 2 Inch (20)
Project uses 2 pieces. You will need 1 package.
- FHP-5526 - Vintaj Natural Brass Open Eye Pins 21 Gauge 1.5 Inches (20)
Project uses 2 pieces. You will need 1 package.
- FEA-6640 - Vintaj Natural Brass Round Loop Ear Wire 25mm (2 Pair)
Project uses 2 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding