Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Insert the sterling silver 1" 22 gauge head pin into the light siam 4 mm bicone Austrian crystal crystal bead. Using the round nose pliers, create a simple wire loop after the bead. Trim the excess with flush cutters.
- Open the jump ring on the cell phone strap and attach the cupid charm, then close the jump ring back up.
- Hang the heart charm onto the cell phone strap jump ring via the jump ring that comes with it.
- Use the extra sterling silver 4x6 mm 20 gauge jump ring to hang the crystal from the cell phone strap jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
- FCR-4022 - Cell Phone Strap For Charms Red / Sterling Silver Ring
Project uses 1 piece. You will need 1 package.
- FHP-02310 - Head Pins, 1 Inch Long and 22 Gauge Thick, 20 Pieces, Sterling Silver
Project uses 1 piece. You will need 1 package.
- FJR-03964 - Sterling Silver Open Jump Rings Oval 4x6mm 20 Gauge (20)
Project uses 1 piece. You will need 1 package.
- PND-1234 - Sterling Silver Charm Sleek Puff Heart 11mm
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-0036 - Wubbers Classic Series Bent Chain Nose Quality Jeweller's Pliers
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex