Retired - Adela Layered Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. The top tier necklace will be 16 inches in length. Begin by cutting two 7 inch lengths of the saturn chain. Open one jump ring and attach it to one side of the chevron focal. Attach the other piece of chain to the other side of the chevron. Set this aside.
2. The second tier necklace will be 19 inches in length. Cut two 7 inch lengths of the large oval chain. Open one jump ring and attach it to one side of the 5 inch length of the gemstone chain. Attach the other piece of chain to the other side of the gemstone chain. Set this aside.
3. The third tier of this necklace will be 30 inches in length. Open one jump ring and attach it to the gemstone pendant. Close the jump ring. Slide the small cable link chain through the jump ring. The pendant will swing freely on the chain.
4. Now to attach them to the strand reducer. Make sure the filigree side is up. (See photo for reference)
5. Using jump rings, attach the saturn chain to the first loop of the strand reducer on both sides. Attach the large oval chain to the center loop of the strand reducer on both sides. Attach the small cable link chain to the last loop of the strand reducer on both sides.
6. Open another jump ring and attach it to the top loop of one strand reducer. Close the jump ring.
7. Open another jump ring and attach it to the top loop of one strand reducer and to one lobster clasp. Close the jump ring and you're all done!

• SPAZ-08007 - Amazonite Gemstone and Steling Silver Bezel Pendant, Rectangle 12x41mm, 1 Piece, Green/Silver
  Project uses 1 piece. You will need 1 package.


• FCO-1530 - Silver Plated Ornate Triple Bead Strand Reducer Connector (2)
  Project uses 2 pieces. You will need 1 package.


• CHX-1241 - GenY Chain, Cable Links 1.5x2mm, 1 Inch, Forever Silver
  Project uses 30 Inches. You will need 30 packages.


• CHX-1238 - GenY Chain, Oval Cable Links 3x6.5mm, 1 Inch, Forever Silver
  Project uses 14 Inches. You will need 14 packages.


• CHX-1230 - GenY Chain, Saturn with Oval Cable Links 1.5x2mm, 1 Inch, Forever Silver
  Project uses 14 Inches. You will need 14 packages.


• CHX-1064 - Opalite Glass Drops Gemstone Sterling Silver Wire Wrapped Chain 4mm Rondelles - By The In.
  Project uses 5 Inches. You will need 5 packages.


• PND-12034 - GenY Link, Chevron 50x12mm, 1 Piece, Brushed Forever Silver
  Project uses 1 piece. You will need 1 package.


• FCL-2513 - Beautiful Silver Plated Curved Lobster Clasps 12mm (10)
  Project uses 1 piece. You will need 1 package.


• FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 13 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers