Retired - Witch Tassel Earrings

PROJECT E3102
Designer: Karlin Jones
Skill Level: Intermediate
Long black tassels hang from pewter bead caps mimicking a whimsical witch design in these fun Halloween earrings.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring. You will also need a paint brush for this project.
  1. Before you begin, watch the video on How to Use Vintaj Patinas and Glaze.
  2. Using your paint brush, carefully make some dabs of black Vintaj patina onto your pewter bead cap. Try not to cover the whole bead cap, but instead have some silver showing through. See photo for assistance. Set aside to dry.
  3. Next, onto a silver plated eye pin slide on an olivine Czech fire polish bead followed by your patinated pewter bead cap. Make sure the bead is nestled inside the bead cap. Create simple wire loop with your round nose pliers and snip off any excess wire using your flush cutters.
  4. Watch the video on How to Add a Jump Ring to Premade Tassels.
  5. Following what you learned in the video, use your chain nose pliers to add a silver plated jump ring to your black nylon cord tassel. Close the jump ring.
  6. Open the jump ring on your tassel and slide on the simple loop from the bottom of your Olivine bead. Close back up.
  7. Open a silver plated earring hook (how you would a jump ring) and slide it onto the simple loop at the top of your bead cap. Close back up.
  8. You're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PTS-3514 - Nylon Cord, Tassels 60mm, 6 Pieces, Black
    Project uses 2 pieces. You will need 1 package.

  • BMB-8600 - Antiqued Silver Plated Floral Cone Bead Cap 21mm (1)
    Project uses 2 pieces. You will need 2 packages.

  • XTL-9078 - Vintaj Patina Opaque Permanent Ink - Black Onyx - 0.5 Ounce Bottle
    Project uses 1 piece. You will need 1 package.

  • FEA-3070 - Silver Plated French Wire Earring Hooks 18mm (25 Pairs)
    Project uses 1 pair. You will need 1 package.

  • FHP-6264 - Silver Plated Open Eye Pins 24 Gauge 2 Inch (50 Pieces)
    Project uses 2 pieces. You will need 1 package.

  • BCP-31073 - Czech Fire Polished Glass Beads 10mm Round Olivine (12)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5160 - Silver Plated Open Jump Rings 6mm 19 Gauge (x100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Halloween
Ingredients XTL-9078, FEA-3070, BCP-31073, FJR-5160,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: XTL-9078
Earring Findings, French Wire Hooks 22mm, Silver Plated (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$3.19 / Package | SKU: FEA-3070
Czech Fire Polished Glass Beads 10mm Round Olivine (1 Strand)
You will need 1 package(s).
1 package = 1 Strand.
$3.97 / Package | SKU: BCP-31073
Silver Plated Open Jump Rings 6mm 19 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$4.84 / Package | SKU: FJR-5160
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed