Retired - Studded Skull Bracelet

PROJECT B2070
Designer: Kat Silvia
Skill Level: Intermediate
This cool studded skull bracelet will add a touch of toughness to any outfit.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a bracelet that is approximately 7 inches. To adjust the length of the bracelet simply adjust the length of the cork. Please note that you may need to adjust the inches of cork you order.
  1. Cut 7 inches of cork. Slide on one skull bead. Center it on the cork at your 3 1/2 inch mark.
  2. Measure from the center of the skull, 1/2 inch to the right. Using the 2mm setting on the leather hole punch, punch a hole in the center of the cork. Repeat on the left side of the skull.
  3. Place a rivet into each hole and use the rivet setter tool to set them into place.
  4. From the right rivet move 5/8 inch to the right, punch another hole in the center of the cork. Repeat this step to the left.
  5. Slide on one studded bar bead to each side of the cork so that it passes the holes you just made.
  6. Place a rivet into each hole and use the rivet setter tool to set them into place.
  7. To add the clasp detach the two ends. Move to one end of the bracelet. Place a few drops of super new glue into the recess of one end of the clasp. Slide the cork in and press firmly. Repeat this with the the side of the clasp leaving the bracelet unclasped to dry.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BMB-10022 - Antiqued Silver Plated Spiked Bar Slider For Regaliz 10mm Flat Cork Cord
    Project uses 2 pieces. You will need 2 packages.

  • BMB-9976 - Antiqued Silver Plated Skull Slider Bead For Regaliz 10mm Flat Cork Cord
    Project uses 1 piece. You will need 1 package.

  • FCL-1619 - Antiqued Silver Plated Riveted Magnetic Clasp For Regaliz 10mm Flat Cork Cord - 1 Set
    Project uses 1 piece. You will need 1 package.

  • FCO-4780 - TierraCast Silver Plated Brass Double Round Cap Compression Rivet Set 4mm - 10 Pieces
    Project uses 4 pieces. You will need 1 package.

  • CHX-1132 - Regaliz Flat Portuguese Cork Cord, 10x1.5mm, Sold by the Inch, Black
    Project uses 8 inches. You will need 8 packages.

  • XTL-1059 - Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5502 - BeadSmith Rotating Leather Hole Punch Tool - Creates 6 Hole Sizes!
  • XTL-0786 - TierraCast 4mm Rivet Setter Tool - 1 Tool
  • XTL-5500 - Cord Cutter Tool For Regaliz Cord 3 Inches Long
  • XTL-0258 - Mini Rubber And Steel Bench Block For Metal Working And Wire Hardening
  • XTL-0248 - Eurotool Brass Mallet For Metal Smithing - 1 Pound
Additional Information
Theme Men's, Halloween
Ingredients FCL-1619, FCO-4780, XTL-1059,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Silver Plated Riveted Magnetic Clasp For Regaliz 10mm Flat Cork Cord - 1 Set
You will need 1 package(s).
1 package = .
$9.75 / Package | SKU: FCL-1619
You will need 1 package(s).
1 package = .
/ Package | SKU: FCO-4780
Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
You will need 1 package(s).
1 package = 1 Bottle.
$2.59 / Package | SKU: XTL-1059
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

TierraCast 4mm Rivet Setter Tool - 1 Tool
$6.29 / Package | SKU: XTL-0786
Cord Cutter Tool For Regaliz Cord 3 Inches Long
$8.39 / Package | SKU: XTL-5500
Eurotool Brass Mallet For Metal Smithing - 1 Pound
$34.99 / Package | SKU: XTL-0248

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed