Retired - Spider Maven Necklace

PROJECT N2212
Designer: Kat Silvia
Skill Level: Beginner
Get caught in a web of beads with this spider and cobweb necklace. A perfect Halloween accessory!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 17.5 inches. To modify the length, simply adjust the length of chain on both sides respectively.
  1. Begin by cutting three lengths of chain: one that is 37 links, and two that are 55 links each. Set these aside.
  2. Next, take one head pin and string on one bead. Make a simple wire loop. Set this aside. Repeat this 25 times for a total of 26.
  3. Take one length of chain, 55 links, open one jump ring and attach it to one end with one lobster clasp. Close the jump ring.Move to the other side of this length of this chain and use another jump ring to attach one spider web link. To the other side of the spider web link, use a jump ring to attach the length of chain that is 37 links. To the other side of this chain, attach the other spider web link and then to the other side of the web, attach the final length of chain. To the end of the chain attach one jump ring to finish the clasp.
  4. Next, to attach all the beads to the chain, you will gently twist the simple wire loop open, same as you would a jump ring. If you lay the chain out with the lobster on the left side, you will move to the first spider web. The link that is attached to the jump ring, just left of the web is where you will begin to add the beads. Because of the way the role chain sits, you will add a bead to every other link. To the left of the first web, please add four beads in this manner (Please see photo for reference).
  5. Move to the right side of the first spider web, and starting on the first chain link (not the jump ring) attach 13 beads, remembering to attach them to every other link of chain.
  6. Open one jump ring and attach it to the spider charm and then to the center link of the chain. Now repeat the above step by adding 13 more beads to this section of chain.
  7. Move to the right side of the second spider web and add four beads as you did on the other side. If you hold the necklace up and all the beads are hanging down you have done it correctly.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-2283 - Jewelry Charm, 3-D Textured Spider, 19mm, 1 Piece, Silver Plated
    Project uses 1 piece. You will need 1 package.

  • CHA-9953 - Silver Plated Round Rolo Chain 3.7mm Bulk By The Foot
    Project uses 16 Inches. You will need 2 packages.

  • BCP-02045 - Czech Fire Polished Glass, Faceted Round Beads 4mm, 40 Pieces, Tweedy Violet
    Project uses 26 pieces. You will need 1 package.

  • PND-09093 - Lead-Free Pewter, Spiderweb 2 Loop Charm 23.5x24mm, 2 Pieces, Antiqued Silver
    Project uses 2 pieces. You will need 1 package.

  • FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
    Project uses 7 pieces. You will need 1 package.

  • FHP-5314 - Silver Plated Head Pins 1 Inch/22 Gauge (50)
    Project uses 26 pieces. You will need 1 package.

  • FCL-2522 - Silver Plated Curved Lobster Clasps 15mm (10)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Halloween
Ingredients CHA-9953, FJR-5150, FHP-5314, FCL-2522,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Rolo Chain, 3.7mm, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$4.17 / Package | SKU: CHA-9953
Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$3.39 / Package | SKU: FJR-5150
Head Pins, Silver Plated, 1 Inch Long and 22 Gauge Thick (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$2.25 / Package | SKU: FHP-5314
Lobster Clasps, Curved 15mm, Silver Plated (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$7.69 / Package | SKU: FCL-2522
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed