Retired - Dapper Cadaver Keychain

PROJECT C3003
Designer: Karlin Jones
Skill Level: Beginner
Make this spooky cool keychain featuring a unique Green Girl skeleton pendant in a few simple steps and add a touch of Halloween to your every day look.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Slide one black wood bead onto a gun metal eye pin and create a simple wire loop using your round nose pliers. Snip off any excess wire using your flush cutters.
  2. Open a 4mm gunmetal jump ring using your chain nose pliers and slide on the loop from your gunmetal clasp and the top simple wire loop of your bead. Close the jump ring.
  3. Open a 6mm gunmetal jump ring using your chain nose pliers and slide it through the bottom simple loop of your bead dangle. Before closing, also slide on the top portion of your Green Girl pendant and close. See photo for placement assistance.
  4. Open another 6mm jump ring and slide it through the bottom hole of your Green Girl pendant and close.
  5. Watch the video on How to Add a Jump Ring to Premade Tassels.
  6. Following what you learned in the video, open a 6mm jump ring and carefully slide it through the top portion of your black pre-made tassel. Before closing, also slide it through the previous jump ring and close.
  7. You're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PTS-3502 - Nylon Cord, Tassels 35mm, 6 Pieces, Black
    Project uses 1 piece. You will need 1 package.

  • PND-9330 - Green Girl Studios Pendant Link, 41.7mm Skeleton, 1 Piece, Pewter
    Project uses 1 piece. You will need 1 package.

  • FCL-8200 - Gunmetal Grey Color Base Metal Swivel Lobster Clasp 32mm (2)
    Project uses 1 piece. You will need 1 package.

  • FHP-6270 - Gunmetal Grey Brass Open Eye Pins 21 Gauge 2 Inch (x50)
    Project uses 1 piece. You will need 1 package.

  • BWD-0425 - Smooth Wood Beads, Round with 10mm Diameter, 36 Pieces, Black
    Project uses 1 piece. You will need 1 package.

  • FJR-5296 - Gun Metal Plated Open Jump Rings 6mm 19 Gauge (100)
    Project uses 3 pieces. You will need 1 package.

  • FJR-5294 - Gun Metal Plated Open Jump Rings 4mm 21 Gauge (100)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Men's, Halloween
Ingredients FHP-6270, BWD-0425, FJR-5296, FJR-5294,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: FHP-6270
Smooth Wood Beads, Round with 10mm Diameter, Black (36 Pieces)
You will need 1 package(s).
1 package = 36 Pieces.
$3.89 / Package | SKU: BWD-0425
Gun Metal Plated Open Jump Rings 6mm 19 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$5.99 / Package | SKU: FJR-5296
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-5294
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed